Search Results for 'X'

[angels11_6]

Hi,

I cannot figure out the display settings (in the video wall console) for my video wall. Please see attached video wall diagram with measurements etc.
Can you please help with the exact display settings I need to be putting into the spacedesk video wall console to effect a seamless display.
I want to display 1 image spread over the three monitors.

Thanks in advance!

Angels

[PeN1350]

I tried spacedesk with my Android Phone today, but I´m having an issue in which that happens when I´m playing games om my main screen. When I alt+tab to see another thing while the game is open, my PC crashes for around 10 seconds, becomes all black, my phone disconnects and then my PC continues.
Also, this only happened once, but there was a time that my PC completly froze and started beeping when I alt+tab’ed and required an hard reboot

Specs:
-NVidia GTX 1660 Super
-I have a three monitor setup

[spacedesk Lea]

Hi @janichols,

Can you please download the Microsoft Troubleshooter program here:
https://support.microsoft.com/en-us/topic/fix-problems-that-block-programs-from-being-installed-or-removed-cca7d1b6-65a9-3d98-426b-e9f927e1eb4d

Run the “MicrosoftProgram_Install_and_Uninstall.meta.diagcab”, select Uninstalling.
If “spacedesk Windows DRIVER” is not on the program list, just select “Not Listed” then paste the product code of spacedesk_driver_Win_10_64_v0987_BETA.msi here: {CE7DC976-85B4-45B2-BDEB-A2C7B5BCA18F}

After that, please reboot your primary machine then try again to install the latest spacedesk msi installer from the website.

By the way, do you have third party antivirus software currently active on your primary machine?

• This reply was modified 2 years, 7 months ago by spacedesk Lea.

[spacedesk Marcel]

We assume that you are talking about spacedesk Viewer for Windows.
We are aware of the described (Ultra)VNC approach.
We will implement this feature as soon as a corporate customer will pay for it.
This is not expected to happen any time soon.

In the meantime you could use the “Mouse as Touch” setting.
This uses the local mouse to raise touch events.
It is actually very close to the feature which you are requesting.
Please let us know how this works for you.

[jstun]

im using my laptop as my 2nd monitor right now, my main pc is connected via ethernet, my laptop is connected over wifi. works fine most of the time, but now its getting worse and worse, it just goes to “connected – display off” randomly. my internet connection is stable and fast. the only fix for this is restarting both computers.

help

[elfik]

Hi Lea,

The position of second screen is exactly on the right side of first one. Furthermore, when I change second’s screen position, and place it, for example, to the left side of my first screen, the problem just mirrors (when I move pointer to the right (from second to first screen), except entering first screen, it just jumps to the left side of second screen)

Hope it’s, at least, understandable. 🙂

Also, I have video of such problem, that I filmed on my phone (second screen). If you give me any way to send it, I will send it for you.

[spacedesk Renz]

Hi @spetsnaz,

Please check in the spacedesk Driver Console, click on Incompatible Software to see if any are installed in your server device. If there are, you need to uninstall them for Spacedesk to properly work in your device. If there are no incompatible software installed in your server device, please send us the diagnostic logs for this issue in order for us to analyze the cause of the problem.
– open the spacedesk Console window app by clicking the spacedesk tray icon on your task bar’s notification area
– click the Diagnostics on the left side panel
– if Debug View is not available, please click the download button first
– switch Diagnostic Collection ON
– connect to server and wait for disconnection
– switch Diagnostic Collection OFF
– click Save All Information button

Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply. Thank you.

• This reply was modified 2 years, 7 months ago by spacedesk Renz.
• This reply was modified 2 years, 7 months ago by spacedesk Renz.
• This reply was modified 2 years, 7 months ago by spacedesk Renz.
• This reply was modified 2 years, 7 months ago by spacedesk Renz.

[spacedesk Lea]

Hi @lrbsb,
For further analysis, could you please send us the diagnostic logs for this issue?
– open the spacedesk Driver Console app on your primary machine, then click the Diagnostics
– if Debug View is not available, please click the download button first
– switch Diagnostic Collection ON
– try to connect your viewer app and reproduce the issue
– switch Diagnostic Collection OFF
– click Save All Information button
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.

[oberon23]

Thanks for the suggestion. I tried this but unfortunately when the pc boots it connects to the spacedesk monitor but still only as extended monitor and not the primary. Any other suggestion would be appreciated.

• This reply was modified 2 years, 7 months ago by oberon23.

[Janichols]

I downloaded spacedesk_driver_Win_10_64_v1037_BETA (1).msi and put it in the folder, ran the BAT and it produced the following:
spacedeskmsi_trace.txt

=== Verbose logging started: 3/8/2022 9:20:22 Build type: SHIP UNICODE 5.00.10011.00 Calling process: C:\windows\system32\msiexec.exe ===
MSI (c) (E8:FC) [09:20:22:717]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg

MSI (c) (E8:FC) [09:20:22:717]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg

MSI (c) (E8:BC) [09:20:22:752]: Resetting cached policy values
MSI (c) (E8:BC) [09:20:22:752]: Machine policy value ‘Debug’ is 0
MSI (c) (E8:BC) [09:20:22:752]: ******* RunEngine:
******* Product: C:\Users\janic\Downloads\msi_trace\msi_trace\\spacedesk_driver_Win_10_64_v1037_BETA.msi
******* Action:
******* CommandLine: **********
MSI (c) (E8:BC) [09:20:22:755]: Note: 1: 2203 2: C:\Users\janic\Downloads\msi_trace\msi_trace\\spacedesk_driver_Win_10_64_v1037_BETA.msi 3: -2147287038
MSI (c) (E8:BC) [09:20:22:757]: MainEngineThread is returning 2
=== Verbose logging stopped: 3/8/2022 9:20:22 ===

[Janichols]

Thank you very much for sending the logs. We are currently analyzing it.
For further analysis, could you please download and extract the zip file here: https://www.dropbox.com/s/rqayx759wdwmye2/msi_trace.zip?dl=0
Inside the folder, please copy the most recent spacedesk MSI installer (v1.0.37) then run the get_trace.bat script file.
The script will execute the msi installer (to reproduce the installation error) and will automatically generate a spacedeskmsi_trace.txt file, then please send the file to us after executing the failed msi installer.

There was no msi installer in the folder, only the BAT file to run the script.

Attachments:

You must be logged in to view attached files.

[lrbsb]

I have the same error. Follow the DXdiag.txt file, how should I proceed?

Attachments:

You must be logged in to view attached files.

[spacedesk Lea]

Hi @panxinxin,
Can you tell us which spacedesk version did you install/uninstall?

Is your primary machine monitor still displaying properly after spacedesk uninstall and before restarting it?
Can you try to boot your machine in safe mode?
For assistance, please refer to this link https://www.drivereasy.com/knowledge/how-to-enter-safe-mode-in-windows-10/#why

[spacedesk Lea]

Hi @janichols,

Thank you very much for sending the logs. We are currently analyzing it.
For further analysis, could you please download and extract the zip file here: https://www.dropbox.com/s/rqayx759wdwmye2/msi_trace.zip?dl=0
Inside the folder, please copy the most recent spacedesk MSI installer (v1.0.37) then run the get_trace.bat script file.
The script will execute the msi installer (to reproduce the installation error) and will automatically generate a spacedeskmsi_trace.txt file, then please send the file to us after executing the failed msi installer.

[spacedesk Lea]

Hi @oberon23,

It seems to remember the last desktop mode (extension) even after you detach your primary monitor.
Could you please try the following workaround:
– attach your primary monitor
– connect the spacedesk viewer
– switch to projector mode / second screen only via display switch (Windows logo key + P)
– detach your primary monitor
Try to restart your primary machine this time without your primary monitor attached and just try to connect your spacedesk viewer.

[spacedesk Lea]

Hi @nekona,

Thank you very much for sending the requested logs.
Based on the logs, your primary machine – Surface Pro X is an ARM-based tablet which spacedesk driver do not support.

[spacedesk Lea]

Hi @apollo163,
Is this only happening on spacedesk screen? Or also in your main monitor?

Could you please send us the diagnostic logs for this issue?
– open the spacedesk Driver Console -> Diagnostics in your primary machine
– if Debug View is not available, please click the download button first
– switch Diagnostic Collection ON
– try to connect your viewer app and reproduce the issue
– switch Diagnostic Collection OFF
– click Save All Information button
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.

[Nekona]

Dear Sir/Madam,
Attached are the files you required. If it is not because of your detailed explanation, I will not find the file this quickly. For this reason, I would like to express my gratitude on your help. Thank you very much!

• This reply was modified 2 years, 7 months ago by Nekona.

Attachments:

You must be logged in to view attached files.

[spacedesk Lea]

Hi @itzzkaz,
Could you please check if there’s any incompatible software currently active on your Windows 11 machine?
Just run spacedesk Driver Console -> Diagnostics -> Incompatible Software.

If there’s none, could you please send us the diagnostic logs for further analysis, just follow the steps below:
– click spacedesk Driver Console -> Diagnostics
– if Debug View is not available, please click the download button first
– switch Diagnostic Collection ON
– try to connect your viewer app and reproduce the issue
– switch Diagnostic Collection OFF
– click Save All Information button
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.

[spacedesk Renz]

Hi @romans,

You can use your Spacedesk Viewer device as a remote desktop by duplicating your primary PC’s screen on the Viewer screen. For instructions on how to do this, please check our User Manual under the section “Configuration and Settings” -> “Desktop Extension or Desktop Duplication (mirror) Settings in Display Control Panel” by clicking the link below:
https://forum.spacedesk.netuser-manual/#item_470
Thank you!

[spacedesk Lea]

Hi @nekona,
For further analysis, could you please send us the following:
– run dxdiag.exe on your primary machine, click “Save all information” and send us the output file
– spacedeskSetup.log file located in C:\Users\Public
– setupapi.dev.log file located in C:\Windows\INF

Please save all requested files in one folder, then right-click -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.

[spacedesk Renz]

Hi @gennady46,

Have you tried dragging the window to the second monitor to see if it gets displayed there? If the window is displayed in the Primary PC’s monitor, you should be able to drag the window to the Viewer’s monitor for you to display it there. You can check the arrangement of the monitors by right-clicking on your desktop and clicking Display Settings on the menu that appears so you would know where to drag your windows to.

Alternatively, if you would like to duplicate the Primary PC’s monitor on your Viewer, you can follow the instructions in the User Manual under “Configurations and Settings” -> “Desktop Extension or Desktop Duplication (mirror) Settings in Display Control Panel” by clicking the link here:
https://forum.spacedesk.netuser-manual/#item_471

Thank you!

• This reply was modified 2 years, 7 months ago by spacedesk Renz. Reason: Adding email notifications for additional replies

[spacedesk Lea]

Hi @shodan,

1. Maybe the coming out of full screen is still a bug in our Windows Viewer app which we cannot fix immediately.
This will take time to analyze and fix.

2. Command line parameter
Currently, spacedesk Windows 10 and/or 7 Viewer do not have command line to start up.
You can create a simple program that can auto-run and assign the position of each instances or maybe search for a third party application tool that can do this.

3. Connection via hostname
It should work, by setting it in the UWP Viewer settings -> Connection -> Start-up connect -> host name, type your host name.
Then on the next time you run the UWP viewer app, it will automatically connect to that host name.

[tipek360]

Well it looks like i can send links to other image hosting which don’t have such restrictive file size as this forums but I’m unable to do so I have to write it with very compressed images. Because it looks like my older post weren’t added.

This issue still persists in latest version of spacedesk.
This is screenshot from iPad when connected to computer with Windows 10 using spacedesk: Win10.jpg
This is screenshot from iPad when connected to computer with Windows 11 using spacedesk: Win11.jpg
Both screenshots were made using settings of spacedesk client with custom resolution set to 1920×1080 but only on Windows 10 it looks like it should

Attachments:

You must be logged in to view attached files.

[Toslim33]

Attached files wasn’t uploaded correctly, here’s the fixed files.

Attachments:

You must be logged in to view attached files.

[Toslim33]

Hello,
Spacedesk is a very useful application and I am working using it for a very long time
But I had a common problem since I’ve started using it. If I make a wireless connection (via android hotspot or windows wifi direct/hotspot) after some time it gets stopped, mainly the network stops working and gets disabled on every ways. Only the connection gets disabled which I made connection to spacedesk.
The problem for android hotspot is my windows Wifi is still connected to it but no spacedesk and other connectivity throughout that network. If I disconnect the wifi dongle and reconnect to USB port physically, it gets back.
The problem for windows mobile hotspot is after getting disconnected from spacedesk, the connection to android gets disconnected and when I try to reconnect using wifi list in android, it says disabled.
The uptime for spacedesk connection usually persists between 30 mins to 2-3 hours, but recently it couldn’t hold longer than 10-15 mins and which is really frustrating for me to handle. The connection doesn’t stop if I use USB tethering. But it is the same thing to use USB and primary monitor.

I checked the other forum topics but none helped. Spacedesk saying that I have Nvdia shadowplay enabled, but I have already uninstalled geforce experience and there’s still that error statement. If there’s any way to specifically disable the feature please let me know.

• This topic was modified 2 years, 7 months ago by Toslim33.
• This topic was modified 2 years, 7 months ago by Toslim33. Reason: diagnostics report upload, had to separate file size

Attachments:

You must be logged in to view attached files.

[itzzkaz]

this is happening when i try to use it on windows 11 is there any fix for it yet?

[superrumi]

Hello,

New tablet Xiaomi Pad 5 with updated version MUI 13 (android 11 RKQ1) doesn’t detect primary server. Last spacedesk app update.

Spacedesk working fine between PC on win 10 with last spacedesk working fine and my old tablet (also on updated version of spacedesk).

All deviced are connecter to the same wifi network.

Adding manually the IPP doesn’t work either (checked it was the good adapter interface)

So I conclude problem with android 11 / MUI 13 for this spacedesk version ?

Thanks

[shodan]

Thanks for the reply

I notice my photo did not go through due to the 512kb image limit
I have reduced the image quality further so you can have an idea of my setup.

So, as per the second screenshot, you can see my screen layout

Screen 1 is physically attached to my spacedesk server PC

Screen 2 and 5 are android devices with hdmi output running spacedesk viewer for android, these work no problem, except they do not go to sleep when the server PC does, but that is only minor annoyance (it does say “power save mode” but the screen does not sleep)

Screen 3 and 4 are both connected to another windows PC, they are screen 1 and 2 on that PC.

So I have two instances of spacedesk viewer running on that PC.
This might be the reason why they come out of fullscreen occasionnally ?

When I have to restart my entire system, I have to start two copies of spacedesk viewer, that is the problem.

Are there command line parameters for starting spacedeskviewer ?
The problem is that when I start two copies of spacedeskviewer, they both start on the same (screen 1) and I have to move them manually.

I would like a command line parameter when I can say client id {AAAAA-BBBBBBBB} start fullscreen on screen 1 and cliend id {CCCCCCCCC-DDDDDDDDD} start on screen 2

Also please note that the client come out of fullscreen only on the windows PC running spacedeskviewer, this does not happen on the android devices.

And it is not only going to sleep (which I do not want to disable, I want everything to go to sleep when I am not using it) that causes the spacedesk client to come out of fullscreen but changes in resolution of Screen 1 on the spacedesk server (for instance when an application runs in fullscreen on screen 1, it will switch through other resolution and cause all the screens to flash a little, this is when the out of fullscreen happens)

This is only a little annoying, because I need to keep an extra mouse handy at all times for the viewer PC.

Ideally I would have 4 android devices running the four screens but they are currently out of stock 🙁
Other than that pretty happy with everything to do with spacedesk

I do have one other recommendation to make, currently spacedesk client only accept a IP address, but I would like to use a hostname my PC is called hadron.lan, its IP address changes occasionally but it is always reachable by the hostname “hadron.lan” so access via hostname instead of IP address would be more rliable

Attachments:

You must be logged in to view attached files.

[spacedesk Lea]

Hi @zxxd1527,
Thank you very much for sending the requested logs.
Could you please try the most recent spacedesk Driver v1.0.37 on the website https://forum.spacedesk.net#download.

[spacedesk Lea]

Hi @cartoonest,
Please check the Troubleshooting -> Network Connection chapter in the user manual https://forum.spacedesk.netuser-manual/#item_489.

If the problem still persist, could you please run spacedesk Driver Console -> Diagnostic -> Save All Information.
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.

[spacedesk Lea]

Hi @josemtoar,
For further analysis, could you please send us the following:
– run dxdiag.exe on your primary machine, click “Save all information” and send us the output file
– spacedeskSetup.log file located in C:\Users\Public
– setupapi.dev.log file located in C:\Windows\INF
Please save all requested files in one folder, then right-click -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.

[spacedesk Lea]

Hi @jlaw2756,
We have released a new spacedesk Driver version 1.0.37 with the version mismatch fixed, please try it.

Forum

[spacedesk Lea]

Hi @rwoodland,
We have released a new spacedesk Driver version 1.0.37 with the version mismatch fixed, please try it.

Forum

[spacedesk Lea]

Hi @matt,
We have released a new spacedesk Driver version 1.0.37 with the version mismatch fixed, please try it.

Forum

• This reply was modified 2 years, 7 months ago by spacedesk Lea.

[spacedesk Lea]

Hi @tymops,
We have released a new spacedesk Driver version 1.0.37 with the version mismatch fixed, please try it.

Forum

• This reply was modified 2 years, 7 months ago by spacedesk Lea.

[CyborgTJB]

1st thing first, this is not an issue, just want to know about it.
I came to know about it and install it right away as soon as possible. As I run the Spacedesk app after installation it has suddenly increased monitors display brightness or contrast (I don’t know what…). And I realy-really-really-really like it. Everything is brighter now. Text, Pics, Vids… everything…
O want to know that it how did it happen…? Please, explain it to me…
Thank you in Advance…

[spacedesk Lea]

Hi @keycookie17,

Please try to uninstall the previous version 1.0.33 via Troubleshooter program here:
https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed-or-removed

Run the “MicrosoftProgram_Install_and_Uninstall.meta.diagcab”, select Uninstalling.
If “spacedesk Windows DRIVER” is not on the program list, just select “Not Listed” then paste the product code of spacedesk_driver_Win_10_64_v1033_BETA.msi here: {A3F7D2C7-F3B2-40CD-B236-37BA2CDACA1D}

After that, please try again to install the latest spacedesk msi installer from the website.

[spacedesk Lea]

Hi @dnrovs,

qWave (Quality Windows Audio Video Experience) feature must be installed in your Windows 7 machine.
There are some cases that it’s already installed, but corrupted or maybe your machine is missing some Windows updates.
Please also check if KB2533623 and/or KB3063858 Windows 7 update are installed on that machine.

[spacedesk Lea]

Hi @rwoodland,

Version mismatch will be fixed in the next version release.
The error 2-5 can be caused by other things (e.g. Incompatible products detected) but definitely not because of version mismatch.
Could you please quickly check in the spacedesk Driver Console window -> Diagnostics -> Incompatible Software.

For assistance, please also check the Troubleshooting -> Windows PC (Primary Machine) chapter in the user manual https://forum.spacedesk.netuser-manual/.

[spacedesk Renz]

Hi @jlaw2756,

You can rest assured that the server’s version that you’ve installed is v1.0.36.
This is a known issue and it will be fixed in the next version’s release. Thank you.

• This reply was modified 2 years, 7 months ago by spacedesk Renz.
• This reply was modified 2 years, 7 months ago by spacedesk Renz.

[spacedesk Lea]

Hi @matt_97,

For further analysis, please send us the diagnostic logs for this issue.
– open spacedesk Driver Console -> Diagnostics
– if Debug View is not available, please click the download button first
– switch Diagnostic Collection ON
– try to connect your viewer app and reproduce the issue
– switch Diagnostic Collection OFF
– click Save All Information button
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.

[chris-j]

I had this exact error message appear on the Fire tablet, trying to connect (for the first time) to a Windows 7 64-bit laptop (I installed the Windows 8.1 software).

On the laptop, the error message said “MCT Driver detected – incompatible display driver”. Supposedly there is a “Spacedesk Driver Console” that will allow you to find and remove any incompatible drivers, but I could not find that software anywhere. The only program that installed on my laptop was the basic “Spacedesk Server” software.

So, I gave up and uninstalled Spacedeck from the laptop. But then I saw in the list of programs to uninstall, something called “Trigger External Graphics Family” from MCT Corp. That was the name from the error message. I uninstalled that Trigger software, reinstalled Spacedeck, and it works fine.

I found online discussion of possible problems with uninstalling Trigger External Graphics Family, but solutions were available and in any case those problems (trouble with Microsoft Word and Excel) did not happen on my laptop. “Trigger” was apparently auto-installed at some point for another external monitor or projector, no longer needed I guess.

[spacedesk Lea]

Hi @mediagvc,

To mirror flip the spacedek screen, you have to switch ON the Videowall via spacedesk Driver Console window, then click the connected client.
On the right panel, click the Videowall tab beside the Statistics, to show the videowall settings then you will find below the “Flipped Display (for mirroring)” checkbox.

For assistance, please check the attached image below.

Attachments:

You must be logged in to view attached files.

[spacedesk Renz]

Hi @qi,

For further analysis, could you please send us the following:
– run dxdiag.exe on your primary machine, click “Save all information” and send us the output file
– spacedeskSetup.log file located in C:\Users\Public
– setupapi.dev.log file located in C:\Windows\INF
Please save all requested files in one folder, then right-click -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply. Thank you!

• This reply was modified 2 years, 7 months ago by spacedesk Renz.

[shodan]

Currently using Spacedesk viewer X86/UWP version 0.0.23.0
Works great, but it often switches from fullscreen to maximized windows upon various screen related events.

In particular, if other screens change resolution or if the computer goes to sleep.

This does not happen all the time. I would say once out of 3 or 4 times.

NOTE : This might not have anything to do with it but, I run two instances of spacedesk viewer on the same windows PC each on their own screen.

Full setup is as follow

Spacedesk server is running on windows PC with one monitor attached (1920×1080)

I have four screens in total
2x 1680×1050 screens running on android on a ARM based SBC
and 2x 1680×1050 more screens running off another windows x86 PC running uwp spacedesk viewer

The android viewer does not ever have the “coming out of fullscreen” problem

A few more observations

When the server PC goes to sleep, the android screens remains turned on and display bouncing disconned message
The windows PC running viewer, eventually goes to sleep, but does not wake up when the server PC wakes up.
However, manually waking up the viewer PC, it will reconnect, the viewers are still in the right location, just sometimes not fullscreen anymore.

If the windows viewer PC is reset, I have autologin enabled, however I have not found out how to automatically start two instances of the spacedesk viewer and each put them in fullscreen and each in their proper screen. But over all it works great and is very usable

Here is a picture of my setup

[spacedesk Marcel]

Not yet, but expected to become available within the next 6 months.

[Matt]

Hi, in case you want to try the Android Debug Bridge Cable connection, just follow the steps below:
1. Connect your android device via USB and enable the USB debugging in the Developer options on your Android System settings.
2. Download Android SDK platform tools on your primary machine, then extract it.
https://developer.android.com/studio/releases/platform-tools
3. Open command prompt on the primary machine, change the directory to your android SDK platform tools folder, then type the command: adb.exe reverse tcp:28252 tcp:28252
4. On your Android device, open the spacedesk Viewer app, and make sure to disable the auto-discovery by unchecking the LAN/WiFi box below.
5. Click the + button, then try to connect to 127.0.0.1 IP address.

[spacedesk Lea]

Hi @mery,
To create a video wall, you have to connect first your viewer app then you can assign the Wall Index in the Videowall tab.
For details, please check the “Video Wall Operation” chapter in the user manual.
https://forum.spacedesk.netuser-manual/#item_650

[spacedesk Lea]

Hi @art,
Unfortunately, no short term nor mid term plans of spacedesk Driver/Server for Linux.
Protocol specification is not publicly available.

You can only use your Linux machine as client via spacedesk HTML5 VIEWER http://viewer.spacedesk.net/.
Keep in mind that this HTML5 VIEWER app on Linux is much slower than our native apps on Android and Windows.
This is due to technical limitations of HTML5/Javascript.