搜尋結果「1」

[spacedesk Lea]

Hi @tobik59141,
This is probably a network adapter priority of your machine.
Could you please try the following:
– Run ncpa.cpl to open the Network Connection window
– In there you will see the WiFi adapter, right-click -> Properties, click on Internet Protocol Version 4 (TCP/IPv4) -> Properties -> Advanced
– Uncheck the “Automatic metric” and set the value to any value(e.g. 3), then click OK to finish it.
Then do the same thing with your USB tethering network adapter (Remote NDIS adapter) and make sure it has higher metric value (e.g. 7).
– Then try again with spacedesk and check your WiFi connection.
Looking forward to your feedback.

[spacedesk Lea]

Hi @lenze30,
Please update your spacedesk Driver to latest version 1.0.18 from our website https://forum.spacedesk.net.

[Stern]

Thanks Lea, you provide a stellar support here and I appreciate the responsiveness greatly!

Before I uninstalled Spacedesk (temporary I presume!) I hooked it up once again yesterday with no issues. Used it for a few hours, avoiding the Apple pencil 2 input method and just used is as a third monitor which is fine by itself.

I thought it could be nice for you to have a dxdiag full information file with this “virtual display” connected, see attached file. You don’t need to delete this as it contains no potentially sensitive information as far as I understand, could be good for reference to others to see if they experience similar issues.

___

It is a remarkable feat I must say, to be able to hook up an iPad Pro as client to a W10 machine using pen input on the iPad – over wifi involving a router no less! Of course a few ms of latency is expected but not very problematic, I was more surprised that it worked at all (until the host machine crashed).

Best of luck with this great software!

附加檔案:

你必須 登入 才能查看附件檔案。

[Jeremy]

Dear all,

I am using Spacedesk to work with an Android tablet as a secondary screen, using RNDIS (USB tethering).
Everything works great, except that… when I disconnect the tablet from the computer, and reconnect it later, the Spacedesk client doesn’t list the server address anymore. Thus I cannot establish the connection. Even if I restart the Spacedesk client, or if I restart the Spacedesk service (on the server side), the server is not listed anymore. I am forced to restart the whole Windows 10 computer (server side), and when it is restarted, the server appears again in the spacedesk client ‘connect’ menu.
On some PC, this issue is here, on other PCs, the detection is done on the fly. I cannot understand why.
I was then wondering if I could manually force this detection by executing a Windows command or by understanding which Windows configuration point is missing on some PCs where the issue occurs. My guess is that the client detects the server IP address using the Windows network discovery functionnalities (Indeed, if these functionnalities are disabled, the client never lists the server IP).
So my question is : which event is precisely required to list the server name & IP address?
If you could help, I may then be able, after tablet gets disconnected, to automatically execute a command , or maybe restart a Windows service to force the detection again.

Precision : I am working with the Spacedesk server 0.9.91 version, and I do not want to upgrade it, due to input issues in the latest versions.
Thanks,
Jeremy

• 該主題由 Jeremy 於 2 years, 10 months ago 修改。
• 該主題由 Jeremy 於 2 years, 10 months ago 修改。

[spacedesk Lea]

Thanks for the feedback. Could you please send us an updated logs?
– spacedeskSetup.log file located in C:\Users\Public
– setupapi.dev.log file located in C:\Windows\INF

Which older version is working on your side? Is it the v1.0.6?

[agemo]

I could uninstall via Troubleshooting tool from Microsoft.(from lists)
but
The same error message appears during installation, so I cannot install it yet.

I’ve been using an older version of the software since windows 10.

[spacedesk Lea]

Hi @tuxinator,
We will probably switch to Windows App SDK and WinUI 3 for Windows 10/11.
This will still go through the Microsoft Store.

[spacedesk Lea]

Hi @ryerye619,
To verify if these drivers are not present on your machine, could you please follow the steps below:
– run command prompt as Administrator on your primary machine
– type these commands one by one:
sc query lci_proxykmd
sc query lci_proxywddm
sc query FLxHCIv
sc query ddkmd
sc query ddmgr
Then let us know if one of these command returns a Running or Stopped status.

[spacedesk Lea]

Hi @ryerye619,
I moved your first post in a new topic, please refer to this thread https://forum.spacedesk.netforums/topic/error-2-5-disconnected/

[spacedesk Lea]

Hi @ryerye619,

Thanks for sending your diagnostic logs.
Based on the traces, spacedesk has detected an incompatible display hook driver on your primary machine.
Do you have splashtop/Duet Display/ Fresco Logic software currently installed on your machine?
If yes, please uninstall it then reboot your primary machine.
After that please try again with spacedesk.

[spacedesk Lea]

Hi @girigoa,
THanks for the feedback.
Upon further checking of the logs, based on your dxdiag your graphics card name is Intel(R) HD Graphics 3000 but below the driver name shows “aticfx64.dll,aticfx64.dll,aticfx64.dll,amdxc64.dll” which is for AMD graphics driver.
Please double check on your side what exactly is your graphics adapter, is it really Intel or AMD?
This probably confuses spacedesk driver during grabbing and rendering the screen update.

Another possible reason is that your graphics adapter is already an old one which only supports WDDM 1.2. spacedesk IddCx Driver only supports WDDM 2.0 – above.

[Stern]

Hi, many thanks for letting me try out this great piece of software! However, I experienced the same problem as OP after some hours playing with it and exploring the possibilities it opens up.

Let me take it from the beginning. Installed it today and it worked fine as a third monitor in my setup (see below). It was even possible to use the iPad Pro’s Smart keyboard as alternate keyboard – save a few keys like ”backspace” that didn’t work -, and the Pc’s mouse inputs were recorded great with only minimal lag.

Display settings like position and resolution could be adjusted very easily through Windows 10 display settings, to native resolution for iPad Pro 11” (i.e *very* high) and enlarging the fonts etc to 150% or so gave a great experience – perfectly clear. So far so good.

Then I realized that I could use my iPad as a remote terminal to my Windows laptop in my office, bringing the iPad along to another room sitting in the sofa. Worked just great, as long as you don’t lose track of the mouse pointer to the other monitors in the other room but that’s managable.

The idea came up to try also the Apple pencil 2, so I fired up OneNote and gave it a try. Was actually surprised that it worked quite good, ok there is a lag that makes lines less smooth and so on but it worked well enough to be very useful in, say, the remote teaching applications via Zoom etc that OP was talking about. Problem is that I got freezing and server disconnect after a couple of minutes, and when checking out the laptop in the other room it turned out that it had restarted.

Tried it twice same thing. Checked the system log and there was quite a few informational, warnings and critical messages related to this that I perhaps can relay to you but they are in Swedish.

The system config looks like this:
– Laptop is Asus TUF A15, Windows 10 v 21H1, with Nvidia’s display driver 472.12 (or 30.9.14.7212 as reported in device manager) for the graphics card. There is also integrated graphics in the Ryzen 5 4600H Cpu but there was no mention of that in system requirements, anyway it is driver version 27.20.11032.9001

– iPad Pro (11”, 2018) iPadOS ver 14.8, Apple pencil gen 2.

So in short, I find your software highly promising but felt uncomfortable continue running the server on the host machine so I disabled it for now, maybe decide to uninstall it and wait for updates.

[spacedesk Lea]

Hi @girigoa,

Thanks for your input.
To further analyze this issue, please download the spacedesk diagnostic script here, then extract it.
https://www.dropbox.com/s/z8h5llgi8c2ig3g/2021_spacedeskDiagnosticTool.zip?dl=0

Inside you will find spacedeskDiagnosticTool.cmd, just right-click it then run as administrator on your primary machine.
This script will start a debug view app to capture spacedesk debug traces.
On step 5 it will prompt you to reproduce the issue (by connecting the viewer app and wait for the issue to happen), make sure to do this before pressing any key to continue.
After the script is done, a folder will be created on the same folder as the script file which contains various log files that we need for analysis.
Please right-click it -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply.

Looking forward to your feedback.

[Lezha]

my android cant detect my primary which is win10, i also tried the html5 viewer and it didnt work, both used to work.
the only thing i can think of is me using (https://www.oo-software.com/en/shutup10) to change my windows settings to their recommended settings as well as installing (https://www.henrypp.org/product/simplewall), i tried disabling simplewall and uninstalling it but it didnt fix the problem, my guess is that shutup10 disabled something that spacedesk uses but i also tried resetting my setting and its still broken.

can you help me by telling me if any of these actually removed something that spacedesk uses or are these irrelevant and something else is causing spacedesk to break

[spacedesk Lea]

Hi @sea316,

It seems like a network connection issue.
Are both primary and secondary machine connected on the same local area network?
Do you maybe have VPN (Virtual Private Network) enabled?
Do you have third party firewall software on your primary machine?

For assistance, please also check troubleshooting – Network Connection chapter in the user manual https://forum.spacedesk.netuser-manual/.

For further analysis, could you please send us the following info:
Primary Machine
– operating system (Windows 8.1/10)?
– graphics adapter (AMD/Intel/Nvidia)
– network connection type (wired/wireless/USB tethering/WiFi Direct)

Secondary Machine
– Viewer type (Android/iOS/Windows/HTML5)
– network connection type (wired/wireless/USB tethering/WiFi Direct)

[spacedesk Lea]

Hi @juratykokot,
Are both primary and secondary machine connected on the same local area network?
Do you maybe have VPN (Virtual Private Network) enabled?
Do you have third party firewall software on your primary machine?

For assistance, please also check troubleshooting – Network Connection chapter in the user manual https://forum.spacedesk.netuser-manual/.

For further analysis, could you please send us the following info:
Primary Machine
– operating system (Windows 8.1/10)?
– graphics adapter (AMD/Intel/Nvidia)
– network connection type (wired/wireless/USB tethering/WiFi Direct)

Secondary Machine
– Viewer type (Android/iOS/Windows/HTML5)
– network connection type (wired/wireless/USB tethering/WiFi Direct)

[spacedesk Lea]

Hi @joker1138,

The spacedesk server is set to automatically started upon installation and should be ON always.
It will only be OFF if it was set manually or spacedeskService crashes.

Is it always server OFF on your machine?

For further analysis, could you please send us the following info:
Primary Machine
– operating system (Windows 8.1/10)?
– graphics adapter (AMD/Intel/Nvidia)
– network connection type (wired/wireless/USB tethering/WiFi Direct)

Secondary Machine
– Viewer type (Android/iOS/Windows/HTML5)
– network connection type (wired/wireless/USB tethering/WiFi Direct)

[spacedesk Lea]

Hi @agemo,
Thanks for sending the requested files.
Did you upgrade to Windows 11 while you have spacedesk driver already installed on your primary machine?

Based on the setup log, you are trying to install/uninstall an older spacedesk Driver v1.0.6? Is that right?
Could you please try to uninistall via Troubleshooting tool from Microsoft?
Just download the troubleshooter tool here: https://support.microsoft.com/en-us/topic/fix-problems-that-block-programs-from-being-installed-or-removed-cca7d1b6-65a9-3d98-426b-e9f927e1eb4d

If spacedesk is not on the program list, just select “Not Listed” then paste the product code of current spacedesk version on your machine:
spacedesk_driver_Win_10_64_v106_BETA.msi:{ACBF712E-641A-4E6C-BA06-67019D920FAA}

[spacedesk Lea]

Hi @awm,
Did you notice any error notification on primary machine?
Do you maybe have splashtop software installed on your primary machine?

Could you please send us the following info:
Primary Machine
– operating system (Windows 8.1/10)?
– graphics adapter (AMD/Intel/Nvidia)
– network connection type (wired/wireless/USB tethering/WiFi Direct)

Secondary Machine
– Viewer type (Android/iOS/Windows/HTML5)
– network connection type (wired/wireless/USB tethering/WiFi Direct)

For further analysis, could you please run dxdiag.exe on your primary machine, click “Save All Information”, then attach the output file (dxdiag.txt) on your next reply.

[bdtnrp]

When using Spacedesk Viewer with 2 different USB Hubs/Docking Stations
1) J5Create Model: JCD543
2) Kensington SD4000

The ethernet network port on both units will just suddenly stop working after about 10 minutes using Spacedesk Viewer. The port lights still indicate a connection but the connection is dropped and of course Spacedesk Viewer will tell me after a timeout that the connection has been lost.

When using the Laptop’s (Lenovo T14 Gen 2i) built in ethernet port OR the wifi connection of the laptop, I have no issues whatsoever. I don’t know if there is a conflict with the drivers (either Spacedesk or the hub drivers) or if there is just too much traffic going through the USB, but I cannot use Spacedesk with either docking station as I’ve tried both (at first thinking the ethernet port had gone bad in the hub).

My preferred setup was to use the docking station to connect one display + the ethernet connection and then use Spacedesk as a 2nd Display for the laptop.

Any ideas?

[DesertCookie]

I’m trying to use my Samsung Note 10+ as an HDR grading monitor. Connecting it worked flawlessly, and I’ve already cranked all image quality settings. How though, do I enable the phone’s excellent HDR?
In the Windows settings it tells me it’s running 8bit SDR and there’s no option to enable HDR – though the phone is capable of HDR10+.

Thanks for any leads.

[JuraTyKokot]

My laptop (SONY-VAIO VGN-BZ12EN) cant detect my main computer. I tried everything. Please help.

[andy]

Could you make it possible to disable or tweak the “Connected — Display OFF” message that comes on when the server machine turns off monitors to save power? Perhaps it could be implemented with a check box that you uncheck to not see the message or a text field that you could set to an empty string or black text? The reason is (1) that the message lights up the room if you are sleeping in the same room and (2) with OLED/AMOLED displays it may cause burn in. I searched the forum for posts on this. If it is possible to tweak or disable the message already please let me know.

[POLSKI_KRZAK]

@lea

It turned out that I have installed lci_proxywddm and this error popped up when I tried to remove it

C:\Windows\System32>sc delete lci_proxywddm
[SC] DeleteService FAILED 1072:

The specified service has been marked for deletion.

Help

[agemo]

On windows11

When I tried to update the software, I got an error and could not proceed.
I also tried uninstalling the software, but the same error prevented me from proceeding.
The software is also unusable now.

附加檔案:

你必須 登入 才能查看附件檔案。

[promaks444]

Even if I choose 60 fps, the image is still low fps. How to fix this?

[madmagpiekorge]

Good afternoon, after your clarification, I updated the server on windows, the tablet connected without problems, but after a certain time of 5-10 minutes, the tablet turns off on its own with an error 2-5-6, information 0-5-8. after restarting the tablet, the work can be restored. before restarting the tablet, it stops seeing the server. specifying the server manually does not give a result

[spacedesk Lea]

Hi @billpo,

Are both laptop and tablet connected on the same local area network?
Do you maybe have VPN (Virtual Private Network) enabled?

For assistance Please refer to the Troubleshooting Network Connection chapter in our spacedesk user manual https://forum.spacedesk.netuser-manual/.

For further analysis, could you please send us the following info:
Primary Machine
– operating system (Windows 8.1/10)?
– graphics adapter (AMD/Intel/Nvidia)
– network connection type (wired/wireless/USB tethering/WiFi Direct)

Secondary Machine
– Viewer type (Android/iOS/Windows/HTML5)
– network connection type (wired/wireless/USB tethering/WiFi Direct)

[spacedesk Lea]

Hi @madmagpiekorge,
Thanks for sending your diagnostic logs.
The current spacedesk on your primary machine has expired.
Please update your spacedesk Driver to latest version 1.0.18 which you can download on our website https://forum.spacedesk.net.

[spacedesk Lea]

Hi @mruczeus,
To further analyze this issue, please download the spacedesk diagnostic script here, then extract it.
https://www.dropbox.com/s/z8h5llgi8c2ig3g/2021_spacedeskDiagnosticTool.zip?dl=0

Inside you will find spacedeskDiagnosticTool.cmd, just right-click it then run as administrator.
This script will start a debug view app to capture spacedesk debug traces.
On step 5 it will prompt you to reproduce the issue (by connecting the viewer app and wait for the issue to happen), make sure to do this before pressing any key to continue.
After the script is done, a folder will be created on the same folder as the script file which contains various log files that we need for analysis.
Please right-click it -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply.

[Uszer]

My OS is Windows 10 pro 64-bit

附加檔案:

你必須 登入 才能查看附件檔案。

[MDel]

Hello. I’ve recently moved from duet display to spacedesk. I really love this app, but I’m having frequent bluescreen (Actually it is black screen because it is Windows 11)by Netio.sys error, such as “system thread exception not handled” or “irql not less or equal”. I searched them and read that they are driver issue, but the only driver I installed recently was spacedesk server app. Does anyone also have this issue?

[spacedesk Lea]

Hi @jade,
Could you please try to update your AMD graphics driver?
You can download the latest driver from their website https://www.amd.com/en/support.

If problem still persist, please download the spacedesk diagnostic script here, then extract it.
https://www.dropbox.com/s/z8h5llgi8c2ig3g/2021_spacedeskDiagnosticTool.zip?dl=0

Inside you will find spacedeskDiagnosticTool.cmd, just right-click it then run as administrator.
This script will start a debug view app to capture spacedesk debug traces.
On step 5 it will prompt you to reproduce the issue (by connecting the viewer app and wait for the issue to happen), make sure to do this before pressing any key to continue.
After the script is done, a folder will be created on the same folder as the script file which contains various log files that we need for analysis.
Please right-click it -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply.

[spacedesk Lea]

Hi @haneesh,
You can download and install the current spacedesk Driver v1.0.18 (for Windows 10). It should work with Windows 11 machine too.

[spacedesk Lea]

Hi @bartr,

We have received the request files.
The color issue is due to AMD’s 10-Bit Pixel Format enabled in the settings.
Please disable it, just open the Radeon Software window, click the Settings icon on the top right side, then “Graphics” -> “Advanced” -> disable the “10-bit Pixel Format” then reboot your primary machine to apply the changes.

[ej8989]

Bug still occurs on v1.0.18 (latest) and updated Android App.

[spacedesk Lea]

Hi @victor11,
Did you install one of these driver software mentioned? splashtop/Duet Display/Fresco Logic?
If yes, please uninstall it then reboot your primary machine.

To verify if these drivers are not present on your machine, could you please follow the steps below:
– run command prompt as Administrator
– type these commands:
sc query lci_proxykmd
sc query lci_proxywddm
sc query FLxHCIv
sc query ddkmd
sc query ddmgr
– if one of these command returns a Running or Stopped status
– just type sc delete
– reboot your primary machine

[Victor11]

Здравствуйте, уже 3 дня не могу исправить ошибку: spacedesk x10 Error – Duet Display, Splashtop, Fresco Logic, etc. Driver Detected- Incompatible Display Hook Driver! прошу мне помочь буду очень благодарен. Удалил все конфликтующие драйверы и VPN скачивал обновление драйверов GeForse game ready

[kjstech]

After a vulnerability scan from a third-party company, they discovered (likely via Nessus) that the spacedeskService has weak permissions or is vulnerable to privilege escalation attacks.

spacedeskService – Everyone: Change Service Configuration (DC), Write DAC (WD), Write Owner (WO).

Can this be fixed?

Spacedesk Windows DRIVER 0.9.1098.0

[BartR]

I try to upload here the 16color picture, meanwhile.

EDIT
No. Each time I try your system returns that the size of the picture is too big.
Please send me an email where i can attach the files you required

• 該回覆由 BartR 於 2 years, 10 months ago 修改。原因： The size of the picture was too big.I try to reduce it
• 該回覆由 BartR 於 2 years, 10 months ago 修改。

[spacedesk Lea]

Hi @bluestrikepro,
Is it consistently happening on your machine?
Can you manually reconnect the viewer app after the disconnect?
Did you notice any error notification on primary machine upon disconnect (e.g. Error – Network Connection lost)?

Could you please send us the following additional info:
Primary Machine
– operating system (Windows 11)
– graphics adapter (AMD/Intel/Nvidia)
– network connection type (wired/wireless/USB tethering/WiFi Direct)

Secondary Machine
– Viewer type (Android)
– network connection type (wired/wireless/USB tethering/WiFi Direct)

[Peter]

I spent a lot of time trying to figure out this problem.
My solution.

How to use the WIN key on Android.

1. Connect a USB keyboard, wireless radio or Bluetooth (with WIN key) to Android devices (with USB OTG support)
maybe it will work

OR

2. Install on android
“Hacker’s Keyboard”
Hackers Keyboard Google Play
On Windows, remap the LALT and LWIN keys with “Sharpkeys”. (or another similar program)
(requires .NET Framework 4.0)
Sharpkeys
From now on, on PC and Android, the ALT key will work as WIN and vice versa.
Disadvantage: no ALT key on android.

OR

3. Remap the keyboard shortcuts (not the WIN key itself) you want to use, eg SHIFT + WIN + right arrow on CTRL + F11 (OR ALT) using eg Autohotkey scripts or another program.
You can do this with the * .reg registry file, but it’s a bit tricky.
On android call the additional keyboard in “Hacker’s Keyboard” with the Fn key and press CTRL + F11.

[spacedesk Lea]

Hi @bartr,
Do you have videowall mode enabled?
Can you please send us the following for further analysis:
– dxdiag.txt file – just run dxdiag.exe on your primary machine, click “Save All Information”.
– screenshot of your viewer showing the “old fashion 16 colors”.

[BlueStrikePro]

Im using asus zenpad running Android 7.0

my main machine is windows 11 running with the latest drivers even space desk

it disconnects around 40 seconds and i get everytime this: Error Code: 2-5-6 Error Info: 0-5-8

[andydandy]

Thank you for the quick response! @lea

The problem got solved somehow, maybe because I turned off Video Wall Engine.

The primary machine:
– Windows 10
– NVIDIA Ge Force GTX 1650
– Direct wired connection (without router or switch).It’s also connected to a wireless network(router).

The secondary machine:
– Windows 10
– Direct wired connection (without router or switch).

• 該回覆由 andydandy 於 2 years, 10 months ago 修改。

[tuxinator]

@Spacedesk crew, now that Microsoft deprecates UWP Apps, any chance of a Comeback to MSI Packages also for Windows 10/11 ?

[spacedesk Lea]

Hi @nelbenson2001,
We plans to support game controller input but will not be available any time soon.
We are currently very busy with higher prioritized features (e.g. security, audio, webcam, etc.) and bug fixes.

[spacedesk Lea]

Hi @andydandy,
On which network does spacedesk is connected? Is it connected over ethernet network too?
For further analysis, could you please send us the following info:
Primary Machine
– operating system (Windows 8.1/10)?
– graphics adapter (AMD/Intel/Nvidia)
– network connection type (wired/wireless/USB tethering/WiFi Direct)

Secondary Machine
– Viewer type (Android/iOS/Windows/HTML5)
– network connection type (wired/wireless/USB tethering/WiFi Direct)

[wachsi]

Uninstalling manual done, after that the installer works again. All fine now, thanks a lot!

The steps I need to do are not exact as mentioned in the manual but there are enough information to fix the issue.

To let you know: v1.0.18 works well with Windows 11.

[Peter]

I found an intermediate solution.
You need to create * .bat script and inside:
msiexec / i C: \ spacedesk_driver_Win_10_64_v1018_BETA.msi / qn / norestart

(The installer can be on a flash drive)

With some programs, we change BAT to EXE (in Invisible mode – do not show the window) and name it e.g. spacedesk.exe
(Unfortunately, many antivirus programs treat the file created in this way as a threat and try to block it. You need to find one that at least bypasses Windows Defender. You can check this on the VirusTotal website)

Click on the spacedesk.exe file with the right mouse button and select “Run as administrator” from the menu.

You can also select Compatibility in File Properties and Run this program as Administrator, but when run this way, a little info window pops up.