已创建论坛回复
-
作者帖子
-
19 1 月, 2022 7:14 上午 回复至: Disconnects every few seconds. Can’t find my device for a minute after that. #5768
Hi @righteoushundred,
Thanks for the diagnostic logs.The diagnostic logs are not complete, please follow the steps below to get the logs during disconnect issue.
– open the spacedesk Console window app by clicking the spacedesk tray icon on your task bar’s notification area
– click the Diagnostics on the left side panel
– if Debug View is not available, please click the download button first
– switch Diagnostic Collection ON
– try connect your viewer app and reproduce the issue (once the disconnect issue happen proceed with the next step)
– switch Diagnostic Collection OFF
– click Save All Information button
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply.Hi @xrarach,
Are you using the spacedesk Windows Viewer from Microsoft Store?
Could you please try with the most recent Windows 7 viewer v0.9.37 + latest spacedesk Driver v1.0.31 available on our website https://forum.spacedesk.net#download.This is not configurable at the moment.
Hi @daniel_01,
Could you please send us the following for further analysis:
– dxdiag file of both your primary and secondary machine (just run dxdiag.exe then click “Save All Information”)
– a picture of your monitor setup in portrait mode where touch is not working correctly or maybe a short video showing the touch issue
– which windows viewer app are you using? Microsoft Store version or Windows 7 desktop version?- 该回复由spacedesk Lea 于 2年、 10月前 修正。
Hi @lz_zxf,
Thanks for checking.Can you please try to enable the Automatic Connect to IP address on your iOS viewer settings -> Connection, set your primary machine’s IP address then close-open the viewer app to check if auto-connect will work.
Thanks for the feedback.
Next, can you quickly try to switch spacedesk Server OFF then ON (via Console app) then check if it will help the discovery.- 该回复由spacedesk Lea 于 2年、 10月前 修正。
Hi @tcoyle,
Thanks for sending the setup log files.
Could you please reboot your primary machine then try the most recent spacedesk Driver v1.0.31 from the website https://forum.spacedesk.net#download.
If the same problem still persist please try the following steps:
– go to https://support.microsoft.com/en-us/topic/fix-problems-that-block-programs-from-being-installed-or-removed-cca7d1b6-65a9-3d98-426b-e9f927e1eb4d and download the troubleshooter program
– run the MicrosoftProgram_Install_and_Uninstall.meta.diagcab, select Installing
– select “Not listed” then paste the product code of the spacedesk_driver_Win_10_64_v1031_BETA.msi:{2640B056-E362-4D7E-8FFF-318BCBD16754}Then try again with the installer.
Hi @awm,
Could you please try the most recent spacedesk Driver v1.0.31 available on the website https://forum.spacedesk.net#download.
If the same problem still persist, could you please send us the diagnostic logs for this issue (using the console app)?
– open the spacedesk Console window app by clicking the spacedesk tray icon on your task bar’s notification area
– click the Diagnostics on the left side panel
– if Debug View is not available, please click the download button first
– switch Diagnostic Collection ON
– try to connect your viewer app and reproduce the issue
– switch Diagnostic Collection OFF
– click Save All Information button
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply.Hi @mysteryroach,
Thanks for the feedback.Could you please try the following:
1. Ping the IP address of your laptop from your desktop and vice versa and check if they are reachable to each other.
2. Did you also try with your antivirus disabled?
We noticed that you have Avira antivirus, can you quickly try with Avira disabled?——-
By the way about this:
Seems there’s a new version of Spacedesk now so I upgraded to that, but it didn’t fix anything. I noticed that I couldn’t click on the alert at the top of the Spacedesk console informing me of the new version, as it gives me the error “Your Firefox profile cannot be loaded. It may be missing or inaccessable”. So I had to manually go to the download page myself to download the new version.
This is probably a browser error. Maybe you can try the Method 2 on the link below to fix it.
https://support.mozilla.org/en-US/kb/how-run-firefox-when-profile-missing-inaccessible- 该回复由spacedesk Lea 于 2年、 10月前 修正。
18 1 月, 2022 2:26 上午 回复至: Disconnects every few seconds. Can’t find my device for a minute after that. #5683Hi @righteoushundred,
no attached diagnostics found. Could you please reattach it?Hi @brimston,
Could you please try with the latest spacedesk Driver v1.0.31 with Windows 7 viewer (desktop version) 0.9.37?
You can download it from the website https://forum.spacedesk.net#download.Hi @mysteryroach,
Thanks for sending the diagnostic logs.
Could you please check the current network profile on your laptop? Is it Private or Public?
Just go to Settings -> Network & Internet, check the Properties beside the WiFi network.Hi @delta,
spacedesk Windows 7 Primary Machine is not supported any more.
Windows 7 life cycle has expired. Microsoft do not support Windows 7 any more – nor can we.
The current spacedesk Driver for Windows 8.1 can still be installed on Windows 7.
It works on many Windows 7 machines and configurations.
On others it does not.
These cases, we cannot support neither fix any more.Hi @labviewman,
you have to be connected over the internet to be able to download the spacedesk Windows Viewer app from Microsoft Store or the Windows 7 desktop version from the website https://forum.spacedesk.net#download.Once you download and install spacedesk Viewer and Server/Driver, internet connection will not be needed anymore.
Just make sure that your primary and secondary machine are connected on the same local area network.Hi @blaaue,
Thanks for sending the setup log files.
Could you please try the following:
– uninstall spacedesk via msi installer (if it’s till installed)
– go to https://support.microsoft.com/en-us/topic/fix-problems-that-block-programs-from-being-installed-or-removed-cca7d1b6-65a9-3d98-426b-e9f927e1eb4d and download the troubleshooter program
– run the MicrosoftProgram_Install_and_Uninstall.meta.diagcab, select Uninstalling
– select “Not listed” then paste these product codes (one by one – including all the previous versions installed)
spacedesk_driver_Win_10_64_v1030_BETA.msi:{FA2ABC07-9DF6-4863-A7A6-F9FF43C1EF63}
spacedesk_driver_Win_10_64_v1027_BETA.msi:{5F477E5B-9A22-417C-83FA-396854F23507}
spacedesk_driver_Win_10_64_v1018_BETA.msi:{549279AD-9EE3-4FC7-A433-C6153B94ED98}
spacedesk_driver_Win_10_64_v1014_BETA.msi:{8C330294-7E17-42D6-B17F-1D875427F066}After the steps above, please reboot your primary machine then try again to install the latest spacedesk Driver installer.
- 该回复由spacedesk Lea 于 2年、 10月前 修正。
Hi @simpletiff916,
Did you try to switch to extension mode via Windows Display Settings? Or Display Switch?
Please check Configuration and Settings -> Windows PC (Primary Machine) chapter in the user manual.
https://forum.spacedesk.netuser-manual/Hi @cashdesigner,
Please check Configuration and Settings -> Windows PC (Primary Machine) chapter in the user manual.
https://forum.spacedesk.netuser-manual/Hi @mysteryroach,
For further analysis, could you please run spacedesk Driver Console window on your primary machine (just click the spacedesk tray icon on the task bar) then click Diagnostics -> Save All Information button then send us all the diagnostic logs.
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply.Please also tell us the info on you secondary machine.
What is the operating system?
Which spacedesk viewer app did you use? Android/iOS/Windows10/Windows7/HTML5?Hi @scampo,
Do you have AMD graphics adapter?
If yes, please disable the 10-bit pixel format in the AMD Radeon Software window.
Just open the Radeon Software window, click the Settings icon on the top right side, then “Graphics” -> “Advanced” -> disable the “10-bit Pixel Format” then reboot your primary machine to apply the changes.Hi @nosotrospapaya,
Thanks for checking.
Back to device manager, after checking the “Show hidden devices” + “Devices by connection”, can you find several hidden HID Keyboard Device and HID-compliant touch screen?If there’s any, please try to right-click -> Uninstall all of it.
Then check if you can now uninstall the spacedesk virtual HID device.- 该回复由spacedesk Lea 于 2年、 10月前 修正。
附件:
您需要登录才能查看附件。For further analysis, could you please send us the following:
– run dxdiag.exe on your primary machine, click “Save all information” and send us the output file
– spacedeskSetup.log file located in C:\Users\Public
– setupapi.dev.log file located in C:\Windows\INFPlease save all requested files in one folder, then right-click -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply.
Hi @seddo_korinzu,
Could you please run the services.msc on your primary machine, then find spacedeskService and check if you can easily stop-start it.Hi @rb,
What is the current version of spacedesk on your primary machine?
Is it the latest version 1.0.27?Hi @nosotrospapaya,
can you tell us the previous version of spacedesk installed on your machine?
Can you also try to check if spacedeskService is still running?
Just run services.msc and find spacedeskService.Hi @alberto-sega,
the image file size is too big, please resize it and re-attach again.Hi @lz_zxf,
Thanks for the feedback.
It seems like this is a network discovery issue on the iOS viewer app.
Could you please check on your iPad Settings -> Privacy -> Local Network, if spacedesk is on the list and enabled?Hello to all,
Could you please send us the diagnostic logs for this issue?
– open the spacedesk Console window app by clicking the spacedesk tray icon on your task bar’s notification area
– click the Diagnostics on the left side panel
– if Debug View is not available, please click the download button first
– switch Diagnostic Collection ON
– try connect your viewer app and reproduce the touch issue
– switch Diagnostic Collection OFF
– click Save All Information button
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply.Hi @nosotrospapaya,
Thanks for the confirmation.
Could you please try the following:
1. Go to C:\Windows\System32\drivers\UMDF, find spacedeskDriverHid.dll and delete or rename it (make sure to save a copy before deleting it).
2. Reboot your primary machine
3. Open Device manager and check if you can right-click Uninstall now the spacedesk virtual HID Device.Hi @nosotrospapaya,
If it can’t be uninstalled, that means, there are still devices plugged underneath spacedesk virtual HID device.
Did you click the View -> Devices by connection?Hi @nosotrospapaya,
could you please open the device manager (just run devmgmt.msc) on your primary machine, click View tab -> select Show hidden devices and Devices by connection.
Find any spacedesk virtual devices below, if you find spacedesk virtual HID device, and there are devices underneath it, please right-click uninstall all devices one by one then uninstall “spacedesk virtual HID device” last.By the way, please delete the old spacedeskSetup.log file, the file size seems too big now.
Then try again with spacedesk installation.- 该回复由spacedesk Lea 于 2年、 10月前 修正。
Hello everyone,
For further analysis, could you please send us the diagnostic logs.
If you still have spacedesk installed on your machine, just click the spacedesk tray icon to open the spacedesk Driver Console, then go to Diagnostics page and click the “Save All Information”.
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.If you already have uninstalled/removed spacedesk on your machine, then please send us the following logs:
– dxdiag file (run dxdiag.exe then click “Save All Information”)
– C:\Windows\INF\setupapi.dev.logSave all files in one folder then, right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply.
Hi @nosotrospapaya,
Could you please restart your primary machine, then try again to install the spacedesk.
If the same problem still persist, please send us the following for analysis:
– run dxdiag.exe on your primary machine, click “Save all information” and send us the output file
– spacedeskSetup.log file located in C:\Users\Public
– setupapi.dev.log file located in C:\Windows\INFPlease save all requested files in one folder, then right-click -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply.
Hi @gazok,
You have to run 2 spacedesk Windows Viewer instances then put it on each of your monitors then connect to your primary machine.
For detailed instructions please check the Configuration and Settings chapter in the user manual https://forum.spacedesk.netuser-manual/.Hi @glda19,
Is spacedesk viewer connected over wireless or wired network?
Is your network stable/reliable?Hi @lz_zxf,
Could you please try to connect via HTML5 Viewer on your iPad?
Just open a web browser (e.g. Safari or Google Chrome) then go to http://viewer.spacedesk.net/, then try to connect to your primary machine’s IP address.Hi @nosotrospapaya,
Are you installing the most recent spacedesk Driver v1.0.27 (for Windows 10) from the website?Thank you very much for the feedback.
We will investigate and try to reproduce this issue.
We will get back to you as soon as we have analyzed it.Hi @22boc,
Please check the Troubleshooting -> Network Connection in the user manual https://forum.spacedesk.netuser-manual/.PS: We moved your post to a new topic to avoid confusion.
Hi @ken95,
Please check the Troubleshooting -> Network Connection in the user manual https://forum.spacedesk.netuser-manual/.Hi @ninrez,
Could you please send us the diagnostic logs for this issue?
– open the spacedesk Driver Console window app by clicking the spacedesk tray icon on your task bar’s notification area
– click the Diagnostics on the left side panel
– if Debug View is not available, please click the Download button first
– switch Diagnostic Collection ON
– try connect your viewer app and move a window on secondary display to reproduce the issue
– switch Diagnostic Collection OFF
– click Save All Information button
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply.Based on your other post, your primary machine operating system is Windows 7, right?
spacedesk Windows 7 Primary Machine is not supported any more.
Windows 7 life cycle has expired. Microsoft do not support Windows 7 any more – nor can we.
The current spacedesk Driver for Windows 8.1 can still be installed on Windows 7.
It works on many Windows 7 machines and configurations.
On others it does not.
These cases, we cannot support neither fix any more.Hi @syntax101,
Is your android device connected to your new router’s wifi network too?
Could you please check on your new router’s settings if the client/wifi isolation setting is enabled.
If this setting is enabled, it will prevent a direct communication between connected devices.For more details, please also check the Troubleshooting -> Network Connection chapter in the user manual https://forum.spacedesk.netuser-manual/#item_489.
- 该回复由spacedesk Lea 于 2年、 10月前 修正。
My mistake, now I noticed that you have Windows 7 primary machine.
The new spacedesk Driver Console window is only available in the latest spacedesk Windows 10 driver.spacedesk Windows 7 Primary Machine is not supported any more.
Windows 7 life cycle has expired. Microsoft do not support Windows 7 any more – nor can we.
The current spacedesk Driver for Windows 8.1 can still be installed on Windows 7.
It works on many Windows 7 machines and configurations.
On others it does not.
These cases, we cannot support neither fix any more.Hi @haripriya,
Could you please try to connect with HTML5 Viewer on your iOS device.
Just open a web browser (e.g. Safari/Google Chrome) then go to http://viewer.spacedesk.net/ and try to connect to the IP address of your primary machine.Hi @alex202,
For further analysis, could you please click the “Save All Information” button in the spacedesk Driver Console window, Diagnostics page.
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply.Please send the dmp file to this email: AndroidApp@spacedesk.ph
Thank you for the feedback.
We are glad that it’s working now on your side.Hi @andyc,
I see, thanks for confirmation.
To further analyze the bluescreen crash, could you please send us the last 2 or 3 *.dmp files in C:\windows\minidump folder? -
作者帖子