Suchergebnisse für ‚X‘

[Tor]

I’m using last version on both win10 with Spacedesk server and Ipad 2 ios 15.9.7 as client.
Would be nice if reconnect did work, now I need to restart app on iPad.

I’d like server to „hold“ extend desktop … when secondary screen is off.

• Dieses Thema wurde geändert vor 11 Monaten, 2 Wochen von Tor.

[spacedesk Christian]

Hi @larrygt
If you want to use a single window containing your remote desktop and stretch this across both screens, you need to take note of a few things:
1. Your secondary monitor’s resolution should be adjusted to match your main monitor.
2. The application might have a maximum window size.
3. Check if your application has a configurable display settings.
– In your case, before connecting to your RDP navigate to Display Tab -> Display Configuration -> Adjust size of the remote desktop
– Make sure to check „Use all my monitors for the remote session.

A few notes:
– If Full screen won’t stretch to both monitors, try a windowed screen and manually adjusting the windows to stretch across screens.
– If you cannot resize the windows any further, it means that it is the maximum window size.

[spacedesk Christian]

Hi @sskyau,
Could you please send us the following files, just follow the steps below.
-Open Command Prompt
-type pnputil /enum-drivers
-copy all and save to a text file
–you can open a new command prompt window
-type pnputil /enum-devices
-copy all and save to a text file
Save all the text files in a single Compressed (zipped) folder, then attach the *.zip file in your next reply.

[spacedesk Christian]

Hi @tingtong,
For further analysis, please also provide us with the following files:
– run dxdiag.exe on your primary machine, click “Save all information” and send us the output file
– spacedeskSetup.log file located in C:\Users\Public
– setupapi.dev.log file located in C:\Windows\INF

Please save all requested files in one folder, then right-click -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.

[spacedesk Christian]

Hi @srirams05,
You could try the following:
1. Disable your IPV6 in Control Panel > Network and Internet > network connection > right click on your network adapter and uncheck ‚Internet Protocol Version 6‘ and leave ipv4 checked.
or
2. you can try to prioritize IPV4 over IPV6, please run the Command Prompt as Administrator and type the following commands below:
reg add hklm\system\currentcontrolset\services\tcpip6\parameters /v DisabledComponents /t REG_DWORD /d 0x20
then reboot your pc and try to connect with spacedesk

Q: In my LAN setup described above, can I connect my ipad to the LAN switch to which the Primary PC is connected?
A: Yes, Theoretically, it should work with the use of an ethernet adapter for your Ipad, but please note that this feature has not been fully tested yet. so it may or may not work on some devices.

[LarryGT]

I have successfully linked my Android tablet as a second extended screen to my Windows laptop over both WiFi and USB cable.

However, I want to use a single window containing my remote desktop and stretch this across both screens (on my dual Windows screen desktop setup I will have email on one screen and work on the other and wish to replicate this with Spacedesk on my laptop-tablet configuration).

I can move the remote desktop window between the two screens and get a small amount on both a the same time but I cannot stretch it right across both screens. I can’t open a second instance on one screen will log off the extant instance.

Is this possible – am I missing a setting somewhere?

[smithee]

New update fixed it on iPhoneSE. Thank you! 🙂

[Furanzou]

This issue has been fixed for me, i just updated my app on Appstore and it works for me.

[lwerman]

OK, I reinstalled 1075 & it seems to be working perfect. Not a single reconnect notification or observable glitch in about 3 hours. I didn’t mention this in my original post as I was saving it for a follow-up, but when 1075 was having issues, I would also sometimes see a message from spacedesk complaining about poor connectivity. It would sometimes popup onscreen & disappear. I had no idea what the issue could be.

My laptop is wired thru a Thunderbolt 4 dock, the tablet is just above it on Wi-Fi 5GHz & the router both are connected to is less than 1 meter to the side. I tried using other apps on the tablet & they seemed fine as a test.

I will keep an eye on the situation, advise & submit the diagnostics if the issue arises again.
If I can be of any assistance, please let me know. While all is well I’m going to turn off the diags for now.

Thanx…..Len

[Pixrol]

I have the same issue. for one of my Ipads (iPad Mini 4, IOS 15.7.9)

please fix asap :pray:

[spacedesk Christian]

Hi @sskyau,
For further analysis, please also provide us the following files:
– run dxdiag.exe on your primary machine, click “Save all information” and send us the output file
– spacedeskSetup.log file located in C:\Users\Public
– setupapi.dev.log file located in C:\Windows\INF

Please save all requested files in one folder, then right-click -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.
Looking forward to your feedback.

[Gideon]

Hello SpaceDesk Team,

Your software works great on my Surface tablet.
I have got two feature requests;

1. Support for lower refresh rates (30 Hz, 15Hz)
This is useful for applications with (mostly) static screens (text editing) and low network bandwidth.

2 In addition to the MSI installer it would be nice to have a SpaceDesk driver package.
(Zipped folder containing an .inf file, and all the application files)
This will allow users to slipstream the SpaceDesk application and drivers into Windows installation media.

[sskyau]

Thanks for the prompt reply. I have done your instruction step by step except for step 4 and step 5 which I couldn’t find any of those devices in device manager. After reboot, the installation process still stop in the „Installing spacedesk Android Control Driver“ step and showing the same error message. Any idea?

[spacedesk Christian]

Hi @lwerman,

Could you please go back to the latest spacedesk version 1.0.75 and send us the Diagnostic logs of this Issue?
Just follow the steps below:
– open spacedesk Driver Console -> Diagnostics
– if Debug View is not available, please click the download button first
– switch Diagnostic Collection ON (make sure to click Yes in the User Account Control box to proceed)
– try to connect your viewer and reproduce the disconnecting issue
– switch Diagnostic Collection OFF
– click Save All Information button (if a message box appears, just click No to proceed)
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.

[spacedesk Christian]

Hi @freakymood,
Unfortunately, The current version of spacedesk Windows 7 viewer doesn’t have the option to hide the ‚x‘ button during full-screen mode.
For now, you can use the spacedesk UWP viewer (for Windows 10) since the full-screen mode in this viewer does not have the ‚x‘ button.

• Diese Antwort wurde geändert vor 11 Monaten, 3 Wochen von spacedesk Christian.

[spacedesk Christian]

Hi @sskyau,
Thank you very much for providing information regarding this issue.
since you cannot install any MSI, removing the old drivers should now be done manually.
Please Go to chapter “UNINSTALL ON WINDOWS PRIMARY MACHINE” => “Manual Uninstall (Troubleshooting Only)” in the user manual https://manual.spacedesk.net/ManualUninstallTroubleshootingOn.html
Do all 7 steps (Step 1 – Step 7) mentioned in this chapter
Chapter “APPENDIX”=> “File List” states all executable files. After deleting all these, there should be nothing left to see any more.

Note: these steps should only be done in exceptional cases if needed and if previously discussed with spacedesk support.

[sskyau]

I got the error message when I was trying to install. I rebooted the computer and got the same result. I think the problem is space desk had been installed previously and for some reasons I need to reinstall the Windows. I restore all the drivers from backup after I reinstall Win10, therefore, I think the space desk drivers also got restored (I captured the screen from search for „spacedesk“ in window explorer). So may be it is the problem, how can I remove the existing old drivers now? I can’t get the program to install so there is no option for me to uninstall.

Attachments:

You must be logged in to view attached files.

[Bandersnatch]

Update, The latest version of spacedesk improved this problem a little! It still happens but i’m thankful that something on this new update improoved how often if does.
I still hope that they find a way to completly fix this stutter problem, but I can bare it with this latest update.

[m-eye-flying]

Device logs show from my iPad Air 2:

info 2023-10-22 12:43:50.000390 -0400 symptomsd COSMCtrl foregroundAppObserver gets (null) for com.datronicsoft.spacedeskApp state 0
error 2023-10-22 12:43:50.000413 -0400 symptomsd COSMCtrl _foregroundAppActivity incoming bundle com.datronicsoft.spacedeskApp has nil supplied UUID, finds existing BD64FCEC-8FBA-349F-95B0-8A4C6E01E887
default 2023-10-22 12:43:50.000421 -0400 symptomsd COSMCtrl ensureMaintenanceTimer set delay 300.500 for eviction timer on com.datronicsoft.spacedeskApp

default 2023-10-22 12:43:50.665385 -0400 ReportCrash Sending event: com.apple.stability.crash {„bundleID“:“com.datronicsoft.spacedeskApp“,“bundleVersion“:“1.0.52″,“exceptionCodes“:“0x0000000000000000, 0x0000000000000000(\n 0,\n 0\n)EXC_CRASHSIGABRT“,“incidentID“:“3670029C-E712-4D00-A927-3A97E7D91F48″,“logwritten“:1,“process“:“spacedesk“,“terminationReasonNamespace“:“<none>“}

[m-eye-flying]

This worked yesterday and today it crashes on one of my iPad Air 2. Works on other iPads,iPhone, and Android tablet. Reset iPad, erased iPad, downloaded app same issue. Sounds like on vendor side. Maybe limiting certain devices? I did update my AMD Radeon rx6600 driver yesterday but it was working afterward. Did a Windows Restore point to previous driver. Same issue.

[makayla3]

same issue. was extending windows 11 to an ipad and it was working for awhile but now when i try to connect my ipad the app just crashes. i tried re-istalling both ios app and windows app but nothing. hopefully its fixed soon ):
edit: also i tried restarting both and both are up to date.

• Diese Antwort wurde geändert vor 11 Monaten, 3 Wochen von makayla3.

[inertia]

Update – it only exhibits this problem when the server is running on Tailscale. If the client has the Tailscale network running, it still finds the correct IP.

[inertia]

I am the latest 1.0.75 version installed using the Windows 0.0.30 viewer on the client machine.

The viewer correctly identifies the server hostname but shows a green connection available on another IP address than the host in the same subnet. Manually adding the correct IP does not fix it.

I am using the local IP address on the same subnet as the router and not trying to connect via the Tailscale virtual network.

The ip of my server is 192.168.0.150 and the viewer is finding a connectable client on 192.168.0.14 (which is another computer that doesn’t have the Spacedesk server installed but does have tailscale). Weirdly it comes up green. If I disconnect tailscale it shows both IPs but connects normally on 192.168.0.150.

• Dieses Thema wurde geändert vor 11 Monaten, 3 Wochen von inertia.

[FreakyMood]

Hi, There is a little X at the top right of screen, and I don’t want to see it. It just blinks, or just stays there. How can I make it dissapear? (This only happens when using fullscreen, on client.)
And I don’t want to use spacedesk web because it uses html5 and it is very laggy with only cpu clients. (100% Cpu usage)

Windows11 Pro Server to Windows7 Ultimate Client (64x)

Attachments:

You must be logged in to view attached files.

[spacedesk Christian]

Hi @shrug,

We tried reproducing this issue; however, we can only reproduce the rotation issue at 90°. We have already forwarded that one to our iOS developer for investigation and will inform you once a fix is ready for testing since the issue is very similar.
BTW: Thank you for providing your current workaround, this is very helpful for other users as well.

[spacedesk Lea]

Hi @radiushotmail-fi,
For further analysis, could you please send us the diagnostic logs for this issue?
– click the Diagnostics on the left side panel of the spacedesk Console window
– if Debug View is not available, please click the download button first
– check the Diagnostic Collection box to switch ON (make sure to click Yes in the User Account Control box to proceed)
– try to connect your viewer app and reproduce the crash
– uncheck the Diagnostic Collection box to switch OFF
– click Save All Information button
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.

[spacedesk Christian]

Hi @hngbr,

Your Phone/Main monitor:
Resolution: 1600×720, Aspect Ratio: 2.22: 1
What you want:
Resolution: 800×600, Aspect Ratio: 4:3

You can’t stretch the game to fit your whole screen without getting those black bars because these two resolutions have different Aspect ratios.
If you want the game to cover your entire screen on your main monitor, you’ll need to adjust the game’s resolution to match your phone/main display’s aspect ratio, which is 2.22:1. So, instead of 800×600, we suggest picking a lower resolution with a 22.2:1 aspect ratio to make it fit better (e.g 800×360)

note: make sure to set spacedesk viewer resolution to your phone’s native resolution too.
since you are only using mirroring mode, just go to spacedesk viewer settings > Resolution > uncheck the ‚Use custom resolution‘

[HNGBR]

Hey, im using a mobile phone as a monitor since my monitor broke and i wanted to still play my games, i have a MOTO G9 Play (Resolution : 1600×720) as a mobile phone and i play valorant and roblox, and im using mirror/duplication in this case im using mirror, and Roblox/Valorant support most of the resolutions so in only need the method.

[spacedesk Christian]

Hi @hngbr,

In case of Desktop duplication (mirroring main screen):
Your main screen resolution and spacedesk Viewer resolution need to have same aspect ratio (e.g. 4:3). Example for 4:3 aspect ratio: Main display screen 1920×1440 and viewer display screen 800×600. You can change resolution of spacedesk Viewer in spacedesk Viewer app menu. Still the game might cause black regions on each side or top and bottom if it does not support this specific resolution.

In case of Desktop extension:
You just need to select a resolution which is supported by the game. Change resolution of spacedesk Viewer in spacedesk Viewer app menu.

Are you using Desktop duplication (mirror) mode or Desktop extension mode? In case of mirror/duplication Which resolution do you have on your main monitor? Which game are you playing? Which resolutions does this game support? Does this game adjust resolution automatically?

• Diese Antwort wurde geändert vor 11 Monaten, 3 Wochen von spacedesk Marcel.

[spacedesk Christian]

Hi @the_flue,

Could you try disconnecting and then reconnecting your Magic Keyboard from your Ipad?
if that doesn’t work, Please send us again the Diagnostic logs of this Issue.
Just follow the steps below:
– open spacedesk Driver Console -> Diagnostics
– if Debug View is not available, please click the download button first
– switch Diagnostic Collection ON (make sure to click Yes in the User Account Control box to proceed)
– try to connect your viewer and reproduce the issue
– switch Diagnostic Collection OFF
– click Save All Information button (if a message box appears, just click No to proceed)
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.

[spacedesk Lea]

Hi @radiushotmail-fi,

To mirror flip the spacedesk screen for teleprompter use, you have to switch ON the Videowall mode via spacedesk Driver Console -> VIDEOWALL, then click the connected client underneath Unassigned (or Video Wall# if its assigned to a videowall).
On the right side panel underneath videowall client settings, you will find below the “Flipped Display (for mirroring)” checkbox and just check it.

For assistance, please check the attached image below.

Attachments:

You must be logged in to view attached files.

[Bandersnatch]

How could I disable the optimization spacedesk has when there very little moving on the screen?
I’m using an Ipad Air 5 connected to a High end PC with Mobile Hotspot at 5ghz, the connection speed is amazing and there’s very little delay with everything maxed.
My only problem is when there’s little to no movement on the screen, spacedesk has some sort of optimization that causes stutters and the mouse to feel laggy in a static background.

My question is, can I disable this optimization?

• Dieses Thema wurde geändert vor 11 Monaten, 4 Wochen von Bandersnatch.

[HNGBR]

is there a way to stretch the screen on low resolutions to cover the entire screen? (I would like to do this to play games faster and more optimally.) i really want to cover the whole screen with the low resolution (800×600) I tried some methods but they dont worked,can someone help me?

[spacedesk Christian]

Hi @launchee,

It is possible that you have a wrong arrangement of your Displays in the settings.
Could you please check and follow these steps below?
– Go to Settings > System > Display
– Check which number are your monitors by clicking ‚Identity‘
– Drag and drop your Android monitor (could be display 2) to the right side of your display 1
– Under the Multiple displays section -> click on the drop-down list -> make sure the ‚Extend these displays‘ option is selected.
– Click Apply

[spacedesk Christian]

Hi @daemonium,

iOS USB cable support will be available very soon! (expected late 2023)

While waiting for the Native iOS USB feature, you can use your iOS to connect to spacedesk Via USB tethering.
first, check if your iOS device supports USB Tethering.
if yes, Please check and follow the ‘Connecting a New Display Monitor Over the USB Cable’ -> ‘USB Tethering (iOS and Android)’ chapter in the user manual –
https://manual.spacedesk.net/USBTetheringiOSandAndroid.html

[launchee]

Hello,
I use a Android Handy as 2nd Monitor, but can’t See my Mouse on Android device when i move Mouse to it. I enabled Screen Extension in Windows settings in my Main PC (Server).
Thanks for Help and Kind regards,
Kai

[daemonium]

Till when can we expect IOS USB display coming ? because I use the usb on android a lot and thinking of switching to IOS, but using spacedesk is really important for me

[spacedesk Christian]

Hi @krakerino,

Have you tried connecting your tablet directly to your PC without the USB extender? is the issue still happening using that setup?
there is a similar bug present in the old spacedesk viewer app. Please make sure that your app is updated to the latest version 0.91.10 in the playstore.

BTW: charging your phone while using spacedesk via USB cable at the same time should not affect its connection.

[Krakerino]

I’m using my Android tablet (Tab S7+) as a second touchscreen monitor by USB via a 25ft active USB extender to a USB-C cable to connect the PC to the tablet. The issue happens when I start sending touch inputs to the host computer: it disconnects after ~15 seconds. If I don’t, the connection stays flawless. Please also note that my tablet starts charging when I connect the cable, which might „steal“ the active USB extender’s power and causing it to cut off the connection. Needless to say, I would rather not root my device to disable charging just to test that theory.
I’ve attached a diagram of my setup.
All cables are USB 3.0 but they were the cheapest on Amazon (they were still relatively expensive).

Attachments:

You must be logged in to view attached files.

[spacedesk Christian]

Hi @nhan,

Have you tried toggling off all three switches, including the Android Control as you did previously?
Could you please check if there are any errors in your Device Manager now?
please go to Device Manager, locate your Android device, and check for any errors (indicated by a yellow exclamation mark). If you see one, right-click on it > select ‘Properties,’ > go to the ‘General’ tab > take a screenshot > send it to us.

[spacedesk Marcel]

We actually have virtual webcam driver software and a virtual microphone driver software on shelf and ready to be used. We developed these for corporate customers, but so far we never had time to integrate them into our own software spacedesk. Corporate customers are keeping us too busy always. But who knows, maybe you will be the corporate customer who will contrtact us to integrate these existing Windows webcam and microphone drivers into spacedesk?
We will contact you by email…

[nhan]

The black screen issue is back again 🙁 I’ll wait for the next driver update and an update to the app on Google Play to try again then.

[spacedesk Christian]

Hi @merofabio,

We have now reproduced the same behavior you are experiencing. Unfortunately, as of now, this is an expected behavior with spacedesk. You won’t be able to use the actual mouse pointer as a hover pointer with your stylus. If you are using an active stylus (e.g. SPen), we recommend checking its pen settings to see if there is an option like ‚Hover pointer‘ or ‚Show pointer when hovering‘, if there is, please enable it.

[nhan]

Okay I’m not sure what happened but eventually it was fixed:

– I’m still tinkering with it, reinstalling spacedesk on my Android tablet and it became even worse: Even when there is no USB cable plugged in, after opening the app, it flashes through the home screen and then turn into a black screen.
– I went to apkmirror, redownloaded the previous version, still has the same bug.
– I switched off all 3 toggles in the spacedesk Driver Console in my Windows PC (the big green toggle, the “Local Area Network” and the “USB Cable Android” checkboxes), and after switching them on again it’s fixed and worked as normally.
– I uninstalled the old version, and reinstalled the latest version via Google Play Store and it’s working as expected.
– Additional information: I’ve uninstalled and reinstalled the latest version of the app multiple times before but it didn’t help. 

I hope there is an easier way to log the bug to improve user experience. I still don’t know what was wrong with my setup. It was working fine, and then there’s a bug, and suddenly it’s working fine again.

Thank y’all for such a great app!

• Diese Antwort wurde geändert vor 1 Jahr von nhan.
• Diese Antwort wurde geändert vor 1 Jahr von nhan.

[nhan]

Hi, I’ve tried all the steps you said but it didn’t work.

Could you tell me how I can locate my Android device in Device Manager? I didn’t see anything with a yellow exclamation mark next to it.

Attachments:

You must be logged in to view attached files.

[spacedesk Christian]

Hi @nhan,

Thank you very much for sending your diagnostic logs.
Are you using USB Hub or you are plugging it directly into your Machine’s USB Port?

Could you please try the following:
-Uninstall your spacedesk driver > then reboot your machine > install it again.
-Restart your Android device.
-Try a different USB cable / plug your cable into a different USB port.
-If the issue still persists, please go to Device Manager, locate your Android device, and check for any errors (indicated by a yellow exclamation mark). If you see one, right-click on it > select ‚Properties,‘ > go to the ‚General‘ tab > take a screenshot > send it to us.

[nhan]

I was able to fix the problem of not discovering Primary Machine by fixing my Firewall settings. The Black screen issue for USB Cable Android is still there.

[Mittens4958]

I tried those just now and I’m still having the same issue. I’m not sure if it’s an issue with spacedesk or my laptop at this point. I’ve tried it with two tablets (Android 9 and android 11) and my phone (android 9) and none have worked properly. It seems like once I get to a certain pressure level, it loops back around to the smallest size possible. I have gotten it to work properly by turning my volume down a few notches, so maybe it’s just extra sensitive on my devices

[joseaugustin]

I am trying to setup a system where my main display is replicated to 4 other displays. This is needed for an event presentation where WiFi is not available. SpaceDesk works great for the replication – but I am in a bind on how to create a local wireless network – when there is no internet access. I was hoping to use the Mobile Hotspot functionality in Win10/11 and use that as a hub. But the mobile hotspot feature only works to share an existing WiFi connection – not to setup a new one. Any ideas on the best way to get this going? Will buying a cheap router solve the need? Any way to make it happen without buying new hardware?

I will have a total of 5 devices – combination of Windows and Chromebooks.

[spacedesk Christian]

Hi @dvnlee,

Could you try the following?
– turn Server from On to Off in spacedesk Driver Console
– Restart your primary machine
– try reinstalling your Graphics Driver
for NVIDIA, You can download directly from their website:
https://www.nvidia.com/Download/index.aspx?lang=en-us.

• Diese Antwort wurde geändert vor 1 Jahr von spacedesk Christian.