Verfasste Forenbeiträge
-
Yes, display performance does heavily depend on the network indeed. Highest performance is achieved by cabled networks (e.g. USB, Ethernet). Performance on wireless networks can significantly be improved bypassing routers (configuring primary PC or secondary device as Access Point).
For further more detailed information about the display performance, please check Instruction Manual chapter „Performance Tuning“ https://manual.spacedesk.net/PERFORMANCETUNING.html
Hi @dougw03,
Thank you very much for sending additional information,
Re #1, Could you try changing your Wall dimension to 2880×1920, then do the same resolution to your Videowall Client settings.
For assistance, please refer to the attached Screenshots.
note: you have to hit the enter key per textbox (Width/Height) for the measurement to applyCould you also check again with the -1 disconnect delay? you need to hit the enter as well for this setting to apply
FYI: We just released a new spacedesk UWP viewer on the MS Store. please update your viewer and use it to test the above suggestions.
Hi @dougw03,
Re #1 – Are you using a custom resolution in your UWP viewer?
what resolution are you using?
could you please try assigning your viewer to a videowall, then go to ‚Videowall Client Settings‘ > Click ‚Float wall preview‘ > check the resolution indicated in the floating wall window > use that resolution instead of your Viewer monitor’s resolution.
note: you have to hit the enter key per textbox (Width/Height) for the measurement to apply.Could you perhaps check the following as well?
-Make sure that your UWP is updated to the latest version. We recently released a new version in the MS Store.
-Also, your spacedesk Driver to v1.0.73
BTW: Just to be clear, does your UWP viewer fail to reconnect when put to maximize?Re #2 – Thank you for providing information about this software, we will conduct an investigation about this problem.
On the other hand, spacedesk Videowall is already disabled by default upon installation.Hi @egok,
Could you please provide us the following?
-Check if you have a dump file. you can locate it in C:\Windows\minidump, then look for the most recent dump file.
– Run dxdiag.exe on your primary machine, click “Save all information” and send us the output file
– spacedeskSetup.log file located in C:\Users\Public
– setupapi.dev.log file located in C:\Windows\INFPlease save all requested files in one folder, then right-click -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply.
