-
搜尋結果
-
Hi,
I’m currently running a PC with a Quadro RTX 4000 with 3x1080p projectors connected. I’d like to use my phone as a device to show a small portion of the combined 5760×1080 mosaic compound, however, it appears I cannot connect only when in a mosaic group.
I’ve tried reinstalling/updating GPU drivers, uninstalling/disabling any conflicts such as NVIDIA Shadowplay, and I am still unable to connect in a Mosaic compound. I can connect outside of a surround/mosaic without any issues, just not whilst enabled.
I thought perhaps sending a 5760×1080 signal might be a lot to transmit? However even when sending only a small 320×320 section of the screen, it still doesn’t connect properly.
Any help would be appreciated. Many thanks!
Best Regards,
BradHello. I,m trying to use spacedesk app on my Poco m3 pro. Device resolution of 1080*2400.
I’m not able to reach taskbar area while touching at very bottom of screen. Remote touches appears to be a bit higher than my physical touches: lower the touch bigger the offset. I’m attaching video demonstrating the issue. Please, note, that my real touches are also visible in the video, so you can see growing offsetHello
I am new to using this app but I think it is a great idea.
I have 3 tablets I am trying to connect and have them setup.
2 Samsung TAB E and 1 IpadI can extend the desktop to all 3 but they disconnect after a few minutes.
Attached is the diagnostic file as suggested in the support forum.
My PC is on a wired network and does not have a wireless card.
Are you able to advise on what I could do to make the connection stable. The wifi signal I have is strong and never have any issue with disconnecting.
Thanks
Dave
Hello,
I have this problem after trying to connect to my main computer both wired and wireless.
On my viewer device, it said “connected” then turned off its screen.
I also didn’t have any notification on the host computer when connecting.I have attached my diagnostic file.
Thanks.I tried to download SPACEDESK VIEWER SOFTWARE FOR SECONDARY MACHINE (CLIENT) For Windows 10 – Current version: Beta v0.0.23.0, but it cannot be downloaded from the microfot site (https://www.microsoft.com/en-us/p/spacedesk/9nblggh4trm4?activetab=pivot:overviewtab), nothing happens when you click the “get” option.
Does anyone have the same issue?
Thanks!Hi dear,
I’m facing the same problem. I’m using Window 10, system X64 computer. My viewer is IPAD Air2.
After I entered the IP manually, “IP validation in process” would last for 1~3 minutes, and then the notification was disappeared. I’ve tried several times, but failed to connect with my computer.
I don’t know how to get the diagnostic… Just wondering if I could get some help here?!!!
Gd morning friends,
I hace a Dell XPS 17 with Nvidia and when conected my tablet samsung s7 as a second monitor only can use for 2 min maximun i display error, please find attached a pic, thanks
Hi I have 2 LEnovo laptops running on a LAN cable network with Spacedesk.
The app is working well. I use Spacedesk to make an extension screen on my primary laptop screen.
However I cannot set the screen brightness of the secondary laptop viewer screen.
If I go to the active connection link I only get the statistics tab, I don’t see the tab that will allow me to adjust the display on the client/slave screen.
I am running windows 10 on both machines.
Any help will be much appreciated, Thanks!
Whenever I connect my Chromebook to my PC, it lags for a second, and then on my Chromebook, it says display off and on my PC it thinks that there are 2 screens. And then after around 30 seconds, it disconnects with an error. I restarted both devices, it works for a second then does error 256 and after that I try again and all it does is display off and my PC doesn’t detect anything. Please help, I really want this to work.
Thanks, William
I put different background pictures for primary and secondary monitors (server and viewer). Before the update to server 1.0.37, the viewer monitor would remember the picture after I disconnect and reconnect. Since the update, it doesn’t remember and uses the same picture as the primary monitor. I can still change it, but it will revert to the old one after a reconnect.
Server: Windows 10, v1.0.37
Viewer: Windows 10, v0.0.23.0The installer has encountered an unxpected error installing this package. This may indicate a problem with this package. The error code is 2503.
Pls help me
Router1 IP :192.168.2.2, which is use for internet connecting and DHCP server.
router2 IP:192.168.2.10, use as a gateway for some devices only, DHCP OFF.
and running a server on PC with IP 192.168.2.xwhen i open the app on table, the app can only found the router2’s IP,
even i input my laptop ip, also can’t working properly, with showing IP-validation only.anyone can help with this issue?
I have same error.
Here my “Debugview.zip”im using my laptop as my 2nd monitor right now, my main pc is connected via ethernet, my laptop is connected over wifi. works fine most of the time, but now its getting worse and worse, it just goes to “connected – display off” randomly. my internet connection is stable and fast. the only fix for this is restarting both computers.
help
When i try to connect to my primary server, i connect for 2 seconds and then i get error “Disconnected manually Connected time: 00:00:02”. Please help!
主題: Error code 2-5-6
When I try to use my Chromebook as a monitor, before long, both displays freeze and the app crashes with error code 2-5-6.
Hello.
I use dual display on Windows11 pc and iPad Pro(3rd Genesis).
If I move mouse cursol,iPad Pro’s sync is very slow.
If Compression Quality is down,IT’s as a same.
And, Framerate 30fps and SubSampling is 4:2:0 also are same .
Connection is Wifi ,Wifi is no problem.