搜尋結果「1」

[panxinxin]

After shutdown and restart, the computer displays a black screen, and the software has been uninstalled, which cannot be solved

[spacedesk Lea]

Hi @mikhal980,

Thank you very much for sending the requested logs.
Based on the logs, there’s a RPC_S_CALL_FAILED error (The remote procedure call failed) during spacedesk USB driver installation.

One of the causes of this issue:
– failed installation/uninstallation of software that may have left invalid entries in your system
– improper system shutdown due to power failure

Could you please try the following suggestions below:
1. Run services.msc then find Remote Procedure Call (RPC), and check if it’s running.
2. Make sure to install any pending Windows Update on your Windows Settings.
3. Your AMD graphics driver is not digitally signed, please try to repair/reinstall your AMD graphics driver. Just download the AMD Auto-detect tool here: https://www.amd.com/en/support, to update your AMD graphics driver properly.
4. Run Command Prompt as Administrator, then type the command: “sfc /scannow” and press Enter.

• 該回覆由 spacedesk Lea 於 2 years, 7 months ago 修改。

[spacedesk Lea]

Hi @apollo163,
Is this only happening on spacedesk screen? Or also in your main monitor?

Could you please send us the diagnostic logs for this issue?
– open the spacedesk Driver Console -> Diagnostics in your primary machine
– if Debug View is not available, please click the download button first
– switch Diagnostic Collection ON
– try to connect your viewer app and reproduce the issue
– switch Diagnostic Collection OFF
– click Save All Information button
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.

[spacedesk Lea]

Hi @itzzkaz,
Could you please check if there’s any incompatible software currently active on your Windows 11 machine?
Just run spacedesk Driver Console -> Diagnostics -> Incompatible Software.

If there’s none, could you please send us the diagnostic logs for further analysis, just follow the steps below:
– click spacedesk Driver Console -> Diagnostics
– if Debug View is not available, please click the download button first
– switch Diagnostic Collection ON
– try to connect your viewer app and reproduce the issue
– switch Diagnostic Collection OFF
– click Save All Information button
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.

[spacedesk Renz]

Hi @gennady46,

Have you tried dragging the window to the second monitor to see if it gets displayed there? If the window is displayed in the Primary PC’s monitor, you should be able to drag the window to the Viewer’s monitor for you to display it there. You can check the arrangement of the monitors by right-clicking on your desktop and clicking Display Settings on the menu that appears so you would know where to drag your windows to.

Alternatively, if you would like to duplicate the Primary PC’s monitor on your Viewer, you can follow the instructions in the User Manual under “Configurations and Settings” -> “Desktop Extension or Desktop Duplication (mirror) Settings in Display Control Panel” by clicking the link here:
https://forum.spacedesk.netuser-manual/#item_471

Thank you!

• 該回覆由 spacedesk Renz 於 2 years, 7 months ago 修改。原因： Adding email notifications for additional replies

[spacedesk Lea]

Hi @shodan,

1. Maybe the coming out of full screen is still a bug in our Windows Viewer app which we cannot fix immediately.
This will take time to analyze and fix.

2. Command line parameter
Currently, spacedesk Windows 10 and/or 7 Viewer do not have command line to start up.
You can create a simple program that can auto-run and assign the position of each instances or maybe search for a third party application tool that can do this.

3. Connection via hostname
It should work, by setting it in the UWP Viewer settings -> Connection -> Start-up connect -> host name, type your host name.
Then on the next time you run the UWP viewer app, it will automatically connect to that host name.

[tipek360]

Well it looks like i can send links to other image hosting which don’t have such restrictive file size as this forums but I’m unable to do so I have to write it with very compressed images. Because it looks like my older post weren’t added.

This issue still persists in latest version of spacedesk.
This is screenshot from iPad when connected to computer with Windows 10 using spacedesk: Win10.jpg
This is screenshot from iPad when connected to computer with Windows 11 using spacedesk: Win11.jpg
Both screenshots were made using settings of spacedesk client with custom resolution set to 1920×1080 but only on Windows 10 it looks like it should

附加檔案:

你必須 登入 才能查看附件檔案。

[Toslim33]

Hello,
Spacedesk is a very useful application and I am working using it for a very long time
But I had a common problem since I’ve started using it. If I make a wireless connection (via android hotspot or windows wifi direct/hotspot) after some time it gets stopped, mainly the network stops working and gets disabled on every ways. Only the connection gets disabled which I made connection to spacedesk.
The problem for android hotspot is my windows Wifi is still connected to it but no spacedesk and other connectivity throughout that network. If I disconnect the wifi dongle and reconnect to USB port physically, it gets back.
The problem for windows mobile hotspot is after getting disconnected from spacedesk, the connection to android gets disconnected and when I try to reconnect using wifi list in android, it says disabled.
The uptime for spacedesk connection usually persists between 30 mins to 2-3 hours, but recently it couldn’t hold longer than 10-15 mins and which is really frustrating for me to handle. The connection doesn’t stop if I use USB tethering. But it is the same thing to use USB and primary monitor.

I checked the other forum topics but none helped. Spacedesk saying that I have Nvdia shadowplay enabled, but I have already uninstalled geforce experience and there’s still that error statement. If there’s any way to specifically disable the feature please let me know.

• 該主題由 Toslim33 於 2 years, 7 months ago 修改。
• 該主題由 Toslim33 於 2 years, 7 months ago 修改。原因：diagnostics report upload, had to separate file size

附加檔案:

你必須 登入 才能查看附件檔案。

[Apollo163]

This evening i installed Spacedesk (v1037 BETA), and installed it perfectly with my phone, used it for a few hours and when i was done with it i closed the app and then proceed to close it on my desktop, the screen blacked out for a few seconds and then came back like this

附加檔案:

你必須 登入 才能查看附件檔案。

[itzzkaz]

this is happening when i try to use it on windows 11 is there any fix for it yet?

[superrumi]

Hello,

New tablet Xiaomi Pad 5 with updated version MUI 13 (android 11 RKQ1) doesn’t detect primary server. Last spacedesk app update.

Spacedesk working fine between PC on win 10 with last spacedesk working fine and my old tablet (also on updated version of spacedesk).

All deviced are connecter to the same wifi network.

Adding manually the IPP doesn’t work either (checked it was the good adapter interface)

So I conclude problem with android 11 / MUI 13 for this spacedesk version ?

Thanks

[shodan]

Thanks for the reply

I notice my photo did not go through due to the 512kb image limit
I have reduced the image quality further so you can have an idea of my setup.

So, as per the second screenshot, you can see my screen layout

Screen 1 is physically attached to my spacedesk server PC

Screen 2 and 5 are android devices with hdmi output running spacedesk viewer for android, these work no problem, except they do not go to sleep when the server PC does, but that is only minor annoyance (it does say “power save mode” but the screen does not sleep)

Screen 3 and 4 are both connected to another windows PC, they are screen 1 and 2 on that PC.

So I have two instances of spacedesk viewer running on that PC.
This might be the reason why they come out of fullscreen occasionnally ?

When I have to restart my entire system, I have to start two copies of spacedesk viewer, that is the problem.

Are there command line parameters for starting spacedeskviewer ?
The problem is that when I start two copies of spacedeskviewer, they both start on the same (screen 1) and I have to move them manually.

I would like a command line parameter when I can say client id {AAAAA-BBBBBBBB} start fullscreen on screen 1 and cliend id {CCCCCCCCC-DDDDDDDDD} start on screen 2

Also please note that the client come out of fullscreen only on the windows PC running spacedeskviewer, this does not happen on the android devices.

And it is not only going to sleep (which I do not want to disable, I want everything to go to sleep when I am not using it) that causes the spacedesk client to come out of fullscreen but changes in resolution of Screen 1 on the spacedesk server (for instance when an application runs in fullscreen on screen 1, it will switch through other resolution and cause all the screens to flash a little, this is when the out of fullscreen happens)

This is only a little annoying, because I need to keep an extra mouse handy at all times for the viewer PC.

Ideally I would have 4 android devices running the four screens but they are currently out of stock 🙁
Other than that pretty happy with everything to do with spacedesk

I do have one other recommendation to make, currently spacedesk client only accept a IP address, but I would like to use a hostname my PC is called hadron.lan, its IP address changes occasionally but it is always reachable by the hostname “hadron.lan” so access via hostname instead of IP address would be more rliable

附加檔案:

你必須 登入 才能查看附件檔案。

[spacedesk Lea]

Hi @firius2010gmail,
Currently the full comprehensive feature set of spacedesk is only available on Android Viewer.
This includes On-Screen-Keyboard and Multi-Touch you are asking about.
Eventually it will all become available on iOS, too. However, no official timeline yet.

• 該回覆由 spacedesk Lea 於 2 years, 7 months ago 修改。

[spacedesk Lea]

Hi @zxxd1527,
Thank you very much for sending the requested logs.
Could you please try the most recent spacedesk Driver v1.0.37 on the website https://forum.spacedesk.net#download.

[spacedesk Lea]

Hi @jlaw2756,
We have released a new spacedesk Driver version 1.0.37 with the version mismatch fixed, please try it.

Forum

[spacedesk Lea]

Hi @rwoodland,
We have released a new spacedesk Driver version 1.0.37 with the version mismatch fixed, please try it.

Forum

[spacedesk Lea]

Hi @matt,
We have released a new spacedesk Driver version 1.0.37 with the version mismatch fixed, please try it.

Forum

• 該回覆由 spacedesk Lea 於 2 years, 7 months ago 修改。

[spacedesk Lea]

Hi @tymops,
We have released a new spacedesk Driver version 1.0.37 with the version mismatch fixed, please try it.

Forum

• 該回覆由 spacedesk Lea 於 2 years, 7 months ago 修改。

[josemtoar]

Scince the last update a haven’t been able to use it. I tried updating the driver but the updating window kept running forever without moving. Then I tried to uninstall it but it is the same: the uninstall window keeps moving without doing anything else. I also tried re-installing with no results. Then I tried the Revo Uninstaller and Microsoft problem solver (I saw that one on a thread here) but any of those worked niether. I am running Windows 11 and I just runt out of ideas on how to solve this problem.

[CyborgTJB]

1st thing first, this is not an issue, just want to know about it.
I came to know about it and install it right away as soon as possible. As I run the Spacedesk app after installation it has suddenly increased monitors display brightness or contrast (I don’t know what…). And I realy-really-really-really like it. Everything is brighter now. Text, Pics, Vids… everything…
O want to know that it how did it happen…? Please, explain it to me…
Thank you in Advance…

[spacedesk Lea]

Hi @keycookie17,

Please try to uninstall the previous version 1.0.33 via Troubleshooter program here:
https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed-or-removed

Run the “MicrosoftProgram_Install_and_Uninstall.meta.diagcab”, select Uninstalling.
If “spacedesk Windows DRIVER” is not on the program list, just select “Not Listed” then paste the product code of spacedesk_driver_Win_10_64_v1033_BETA.msi here: {A3F7D2C7-F3B2-40CD-B236-37BA2CDACA1D}

After that, please try again to install the latest spacedesk msi installer from the website.

[rwoodland]

I have the same problem, and the installer on the website for v1.0.36 still installs v1.0.35. This causes server error 2-5.

附加檔案:

你必須 登入 才能查看附件檔案。

[spacedesk Renz]

Hi @jlaw2756,

You can rest assured that the server’s version that you’ve installed is v1.0.36.
This is a known issue and it will be fixed in the next version’s release. Thank you.

• 該回覆由 spacedesk Renz 於 2 years, 7 months ago 修改。
• 該回覆由 spacedesk Renz 於 2 years, 7 months ago 修改。

[JLaw2756]

After uninstalling version 1.0.35 using the add or remove programs setting in windows 10 then restarting the pc, Using the 1.0.36 msi file to install spacedesk I see that it instead installs 1.0.35. After that I also tried uninstalling using the msi file itself, but still see 1.0.35 after installing. Double checked and I am definitely using the 1.0.36 msi file.

附加檔案:

你必須 登入 才能查看附件檔案。

[spacedesk Lea]

Hi @shodan,

Thank you very much for the feedback.

1. Coming out of fullscreen
We will try to reproduce it, but so far it’s not yet happening on our side. Maybe keeping the client monitor active to prevent monitor sleep can already help avoid this, please check #2.

2. To keep the client monitor active while server is on PC sleep, just activate it in the spacedesk UWP viewer Settings -> Display -> Keep display on.

3. To start spacedek UWP Viewer automatically during Windows Start-up, we suggest the following steps:
– run “shell:appsFolder” then find spacedesk VIEWER
– right-click the spacedesk VIEWER -> Create shortcut
– the shortcut file will be created on the Desktop
– run “shell:startup”, then copy/move the “spacedesk VIEWER – Shortcut” file from Desktop to the Startup folder.
(just copy-paste another shortcut file with different name so that it will start two UWP viewer instance upon start up)
PS: As for the position of each viewer instance, we don’t know if it’s possible to specify the position for each instance, maybe you have to create a simple program for it.

[chris-j]

I had this exact error message appear on the Fire tablet, trying to connect (for the first time) to a Windows 7 64-bit laptop (I installed the Windows 8.1 software).

On the laptop, the error message said “MCT Driver detected – incompatible display driver”. Supposedly there is a “Spacedesk Driver Console” that will allow you to find and remove any incompatible drivers, but I could not find that software anywhere. The only program that installed on my laptop was the basic “Spacedesk Server” software.

So, I gave up and uninstalled Spacedeck from the laptop. But then I saw in the list of programs to uninstall, something called “Trigger External Graphics Family” from MCT Corp. That was the name from the error message. I uninstalled that Trigger software, reinstalled Spacedeck, and it works fine.

I found online discussion of possible problems with uninstalling Trigger External Graphics Family, but solutions were available and in any case those problems (trouble with Microsoft Word and Excel) did not happen on my laptop. “Trigger” was apparently auto-installed at some point for another external monitor or projector, no longer needed I guess.

[shodan]

Currently using Spacedesk viewer X86/UWP version 0.0.23.0
Works great, but it often switches from fullscreen to maximized windows upon various screen related events.

In particular, if other screens change resolution or if the computer goes to sleep.

This does not happen all the time. I would say once out of 3 or 4 times.

NOTE : This might not have anything to do with it but, I run two instances of spacedesk viewer on the same windows PC each on their own screen.

Full setup is as follow

Spacedesk server is running on windows PC with one monitor attached (1920×1080)

I have four screens in total
2x 1680×1050 screens running on android on a ARM based SBC
and 2x 1680×1050 more screens running off another windows x86 PC running uwp spacedesk viewer

The android viewer does not ever have the “coming out of fullscreen” problem

A few more observations

When the server PC goes to sleep, the android screens remains turned on and display bouncing disconned message
The windows PC running viewer, eventually goes to sleep, but does not wake up when the server PC wakes up.
However, manually waking up the viewer PC, it will reconnect, the viewers are still in the right location, just sometimes not fullscreen anymore.

If the windows viewer PC is reset, I have autologin enabled, however I have not found out how to automatically start two instances of the spacedesk viewer and each put them in fullscreen and each in their proper screen. But over all it works great and is very usable

Here is a picture of my setup

[Qi]

When I installed the server, he told me that the installation failed

[Matt]

Hi, in case you want to try the Android Debug Bridge Cable connection, just follow the steps below:
1. Connect your android device via USB and enable the USB debugging in the Developer options on your Android System settings.
2. Download Android SDK platform tools on your primary machine, then extract it.
https://developer.android.com/studio/releases/platform-tools
3. Open command prompt on the primary machine, change the directory to your android SDK platform tools folder, then type the command: adb.exe reverse tcp:28252 tcp:28252
4. On your Android device, open the spacedesk Viewer app, and make sure to disable the auto-discovery by unchecking the LAN/WiFi box below.
5. Click the + button, then try to connect to 127.0.0.1 IP address.

[TymoPs]

Primary Machine
– operating system Windows 10
– graphics adapter AMD
– network connection type wired (ethernet)

Secondary Machine
– Viewer type Windows
– network connection type wired

[spacedesk Lea]

Hi @aragubas,
Thank you very much for reporting this issue.
We checked this issue on our side but so far we cannot reproduce it.

Could you please send us the following for further analysis:
1. spacedesk diagnostics logs
– On primary machine, open the spacedesk Driver Console app -> Diagnostics.
– Click DebugView download button first (if not yet available)
– click Diagnostics ON
– Connect spacedesk Viewer and recreate the touch issue
– click Diagnostics OFF
– click “Save All Information”
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.

2. Can you please also tell us the current Android version of your Samsung Galaxy Tab 3 Lite (SM-T110) device?

3. Only if possible, can you please also send us the screen recording of this issue?

[spacedesk Lea]

Hi @freemoongba,
We have sent the spacedesk Driver BETA 1.0.10 msi installer to your registered email address, please check.

[juniorloco]

Vulnerabilities
44676 – SMB Insecurely Configured Service-
Synopsis
At least one insecurely configured Windows service on the remote host is affected by a privilege escalation vulnerability.
Description
At least one insecurely configured Windows service was detected on the remote host. Unprivileged users can modify the properties of these affected services, allowing an unprivileged, local attacker to execute arbitrary code or commands as SYSTEM.

Nessus checked if any of the following groups have permissions to modify executable files that are started by Windows services :

– Everyone
– Users
– Domain Users
– Authenticated Users
See Also
https://docs.microsoft.com/en-us/windows/desktop/Services/service-security-and-access-rights
Solution
Ensure the groups listed above do not have ChangeConf, WDac, or WOwn permissions. Refer to the Microsoft documentation for more information.
Risk Factor
High
CVSS v3.0 Base Score
7.8 (CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H)
CVSS v2.0 Base Score
7.2 (CVSS2#AV:L/AC:L/Au:N/C:C/I:C/A:C)
References
XREF IAVT:0001-T-0753
Plugin Information
Published: 2010/02/22, Modified: 2022/02/02
Plugin Output
tcp/445/cifs

The following service has insecure group permissions:

spacedeskService (spacedeskService) :
– Everyone: DC, WD, WO

[spacedesk Renz]

Hi @zxxd1527,

For further analysis, could you please send us the following:
– run dxdiag.exe on your primary machine, click “Save all information” and send us the output file
– spacedeskSetup.log file located in C:\Users\Public
– setupapi.dev.log file located in C:\Windows\INF
Please save all requested files in one folder, then right-click -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply.

Thank you!

[Matt]

Oh @aragubas, I didn’t know that. Though my tablets are running Android 10, so that wasn’t a problem for me. Thanks

[aragubas]

I’m having a weird issue with touch support, when i tap the screen once it doesn’t register, but after tapping it again it does register, if i tap 2 times after that it doesn’t register touch and the cycle continues;

The viewer device is a Samsung Galaxy Tab 3 Lite (SM-T110). it seems like this is some sort of palm-rejection or something, i really wanna have proper touch support to control my stuff without having to tap 9999 times.

[aragubas]

I’m trying to use my old Samsung Galaxy Tab 3 Lite (SM-T110) as a second monitor for my computer to increase my productivity. I have tried using wifi connection for that but its too slow and unstable to be useable, so i found a way to use USB Tethering to connect my tablet to my computer. It worked, pinging the interface gives me <1MS delay, spacedesk is noticeable faster and responsive, but there is still a noticeable lag and the video feed just freezes from time to time. Reducing quality and framerate seems to give similar results;

What can i do to have lower lantency or don’t that these lag spikes. If its possible to remove the lagspikes i will be already satisfied.

[TymoPs]

The title says it all, Im on windows 10 everything istalled as it should but I realized that its the wrong version when the secondary machine (laptop) didn’t find my server (PC)

[Looping]

Hi,

thanks for your answer and the advice, I will try it out.

Another Error that happened to me today, is it the same reason?
The Error Code is:
2-5-6-5-4-5-6-5-6-5-4-5-6-5-6
and the Error Info is:
0-5-8-9-10-5-8-9-8-9-10-5-8-9-8

I attached a new .zip-file again.

Best regards

附加檔案:

你必須 登入 才能查看附件檔案。

[spacedesk Renz]

Hi @gdma1956,

For further analysis, could you please send us the following:
– run dxdiag.exe on your primary machine, click “Save all information” and send us the output file
– spacedeskSetup.log file located in C:\Users\Public
– setupapi.dev.log file located in C:\Windows\INF
Please save all requested files in one folder, then right-click -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply.

• 該回覆由 spacedesk Renz 於 2 years, 7 months ago 修改。

[gdma1956]

Hi, my name is roger, I want to use your developed tools for screen mirror.
Try many times still fail install on my win 10(Home 64bit version, 1809 OS build 17763.1039)
this is my download package : spacedesk_driver_Win_10_64_v1035_BETA
how to solved this problem ?

附加檔案:

你必須 登入 才能查看附件檔案。

[spacedesk Lea]

Hi @matt,
Can you further describe when you said USB tethering sometimes doesn’t work?
Is the private network cannot establish over USB tethering?
You can easily check in the spacedesk Driver Console -> Network -> Adapter Interface, if the Remote NDIS Adapter is active (this is the network adapter for USB tethering network).

As for the “Connected no internet” in hotspot setup, this is still good since spacedesk does not require internet connection, it only needs to be connected to a local area network.

In case you want to try the Android Debug Bridge Cable connection, just follow the steps below:
1. Connect your android device via USB and enable the USB debugging in the Developer options on your Android System settings.
2. Download Android SDK platform tools on your primary machine, then extract it.
https://developer.android.com/studio/releases/platform-tools
3. Open command prompt on the primary machine, change the directory to your android SDK platform tools folder, then type the command: adb.exe reverse tcp:28252 tcp:28252
4. On your Android device, open the spacedesk Viewer app, and make sure to disable the auto-discovery by unchecking the LAN/WiFi box below.
5. Click the + button, then try to connect to 127.0.0.1 IP address.

• 該回覆由 spacedesk Lea 於 2 years, 7 months ago 修改。

[spacedesk Lea]

Hi @wastanley,
I assume your primary machine is either Windows 7 or 8.1, right?
FYI: spacedesk Driver Console window -> Diagnostics is only available for Windows 10/11 primary machine.

To get the diagnostic logs for Windows7/8.1 machine, please download the spacedesk diagnostic script here, then extract it.
https://www.dropbox.com/s/d8w439rp66vqbr1/2022_spacedeskDiagnosticTool_Legacy.zip?dl=0

Inside you will find spacedeskDiagnosticTool.cmd, just right-click it then run as administrator.
This script will start a debug view app to capture spacedesk debug traces. If there’s a pop-up message from DebugView, just press “Agree” to proceed.

On step 4 it will prompt you to reproduce the issue (by connecting the viewer app and wait for the issue to happen), make sure to do this before pressing any key to continue.

After the script is done, a folder will be created on the same folder as the script file which contains various log files that we need for analysis.
Please right-click it -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply.

[wastanley]

I re-installed Spacedesk and now I’m running version 1.0.35. I am, however, getting the same error.

I’m not sure what you mean about the diagnostics. On the main computer with the driver console, there is a dialog box that only has a Settings option in the top left. When I select that, I can toggle the function ON and OFF or choose Windows Display Control Panel…, Clear All Display Settings, or Hide taskbar icon.

Where would I find the diagnostic option?

[brickoneil]

Downloded driver for primary computer, an Asus 2N1, and the app for my kindle fire with the intention of having a second screen to send another app, like an email client or browser for research, not a duplicate/mirror of my primary computer screen. Is Spacedesk capable of that?

[andy]

I can’t reproduce the problem. I completely uninstalled and reinstalled both applications and updated the android client with the latest version that just came out. I now have SpaceDesk server 1.0.35 running and everything appears fine. I used to get a BEX crash for the Xencelabs driver application, see attachment, but for the first time in weeks that didn’t happen now. I have attached an image of the Xencelabds driver application’s program folder as well with files. It uses some sort of QT interface toolkit. Just curious if you have any ideas of what might have caused the crashes.

附加檔案:

你必須 登入 才能查看附件檔案。

[spacedesk Lea]

Hi @swedcap,
Please try the most recent spacedesk Driver v1.0.35 which is available on the website https://forum.spacedesk.netuser-manual/.
If problem still persist, can you further describe the problem on your side?
Is it a discovery issue? Error code upon connect? Display Off?

For assistance, please also check Troubleshooting chapter in the user manual https://forum.spacedesk.netuser-manual/.

PS: We moved your post to a new topic to avoid confusion.

• 該回覆由 spacedesk Lea 於 2 years, 7 months ago 修改。

[spacedesk Lea]

Hi @maicha,
We sent you the old msi version 1.0.9 to your registered email address. Please check.

[spacedesk Lea]

Hi @kdb13,
spacedesk is currently using JPEG Image compression and it’s a lossy compression which means that the quality of image will be reduced after compression.

[andy]

After doing some test the problems occur all the way back to version 1.0.12 that’s the earliest version I had downloaded.