[HGKnn]

Thank you very much, this issue was solved in v2.1.18, my G304 and GPW 2 did not have the previous failure, by the way, in the previous version, when connecting my Logitech mouse and then plugging in the USB cable to the Android device, the Android device would not automatically jump to spacedesk, and now this issue has also been solved, thank you very much.

[HGKnn]

I have regenerated all the log files and the new address is as follows
https://1drv.ms/u/c/f4428563c83edc60/EUuCu8qNjadHo3itoNy_x-YBKwuABUFIvz8f5BRvrMl4VA?e=cHlwtM

[HGKnn]

I’ve uploaded my logs into my OneDrive with the link below:
https://1drv.ms/u/c/f4428563c83edc60/EbsqKjSvx59Lg3Tagi5PFVcBrPZfPOhnTbN1yI03GhW7ww?e=SIpm5b

[HGKnn]

Well, it’s obviously very difficult to upload logs of this size of 8.02MB, I can only upload logs here that I can upload,If you still have questions, please contact me.

附件:

您需要登录才能查看附件。

[HGKnn]

here

附件:

您需要登录才能查看附件。

[HGKnn]

Since the size limit of the uploaded file on the website is 512kb, the compressed package will be sent in the form of two compressed volumes, here is the first one, and I will upload the second compressed volume below

[HGKnn]

Hi, I have the same problem, and this problem has been bothering me for a while, first of all this problem affects all Logitech mice connected wirelessly, when the system starts, this problem usually does not occur (of course I may be alone), if the wireless mouse driver is disabled or the mouse’s wireless adapter is unplugged when the system is running and spacedesk is working, then the above problem will occur, but at this time the Logitech mouse connected by wired will not receive the effect, in Logitech On the Lightspeed Receiver events page, we can get the following error reports:

The device USBVID_046D&PID_C5476&3af0f9ce&0&14 has a problem booting.
Driver name: oem55.inf
Class GUID: {88bae032-5a81-49f0-bc3d-a4ff138216d6}
Service: USBCCGP
Low-level filterer: spacedeskDriverAndroidControl vhf l
High-level screening procedure:
Question: 0x0
Issue Status: 0xC00000E5

Of course, if you want to reproduce the problem, it’s very simple, the log file is in the attachment I uploaded, when the system is working fine and making sure that the spacedesk driver is running, at this point disconnect the wireless adapter of the Logitech mouse, and then plug it back in, the problem can be perfectly reproduced, then I connect the mouse with a wire, and turn off the log collection, and the mouse will not have a problem.

Because of the language problem, here I can only use Bing Translator for problem feedback, if there are any questions, you can ask further questions, and finally please trouble to solve this problem, please.

[作者]

帖子