Sonarpen pen pressure not working

[Mittens4958]

Hello! I recently updated both my driver and viewer versions of spacedesk and the sonarpen crashing issue was resolved, but pen pressure is not working correctly. When I put my stylus down with no pressure at all it’s at full size and opacity, but when I put pressure on it, suddenly it becomes very small as if I was putting very little pressure. I have tried this on multiple apps and it’s the same on all of them. I have verified it isn’t my stylus already.
I’m using windows 11 home version 22h2

[Mittens4958]

Here’s a video explaining it a little more. The thick lines are when I have no pressure put on the pen, the thin lines are where I put pressure.

• 该回复由Mittens4958 于 1年、 1月前 修正。原因： Video was too large, optimized it

[Mittens4958]

Link to video: https://www.youtube.com/watch?v=5yp8SkI6p1k
(Idk what’s going on and why it won’t update my reply ;-;)

[spacedesk Christian]

Hi @mittens4958,

Have you tried calibrating your SonarPen?
If not, please follow these steps: Go to ‘Input Devices’ > Pen > SonarPen Stylus > Calibrate SonarPen. It will then direct you to a Google Play Store page for the SonarPen app. Please download it and follow the instructions provided by that app. At the end of the calibration process, you will be able to test the pressure sensitivity of the SonarPen.
Please inform us if the issue persists after completing the process.

Also, could you please let us know which other apps you have tried using the pen with?

[Mittens4958]

I’ve already calibrated it multiple times.
Pen sensitivity works until I put too much pressure on it, then it seems like it loops around to the smallest size again. I’ve fixed it by turning the volume on my tablet down a little bit though.
I’ve used Krita and microsoft whiteboard with it on my PC. Neither worked properly until I turned the volume down. I tested it on my tablet with IbisPaint and the pen worked properly with the volume turned all the way up.

[spacedesk Christian]

Hi @mittens4958,

We tried reproducing this issue, but we still haven’t observed it on any of our available devices.
Not sure if they’ll work, but if you haven’t tried these steps yet, please try the following:
try reinstalling the spacedesk Android viewer v0.91.10 > reboot your Android device then recalibrate it again, make sure that the volume is turned all the way up.

[Mittens4958]

I tried those just now and I’m still having the same issue. I’m not sure if it’s an issue with spacedesk or my laptop at this point. I’ve tried it with two tablets (Android 9 and android 11) and my phone (android 9) and none have worked properly. It seems like once I get to a certain pressure level, it loops back around to the smallest size possible. I have gotten it to work properly by turning my volume down a few notches, so maybe it’s just extra sensitive on my devices

[作者]

帖子