Cannot detect any Primary Machine

[Amfidiusz]

Hello,

So I did set up the client app on my PC. I connected it both by the cable and to the WiFi. However, when I try to connect from my Android tablet (Teclast P10HD), I get a constant IP validation and the app is unable to connect to the primary machine. It does not recognize the primary machine automatically, it keeps on validating IP after adding that IP manually.

– They are both in the same WiFi network.
– I am using Sagem router with default setting, I cannot see any isolation switches in the settings.
– I am not using any firewall other than Windows Security.
– I am not using VPN.

Any chance you could help me out with this one, please?

• 该话题由Amfidiusz 于 2年、 5月前 修正。原因：Added tablet screenshot

附件:

您需要登录才能查看附件。

[spacedesk Lea]

Hi @amfidiusz,

Thanks for the info.

Are you sure there’s no client/AP/wifi isolation on your wifi router settings?

What is the current network profile of your wifi network in your primary machine? Private or Public?
You can check it in Windows Settings -> Network & Internet -> WiFi or Ethernet properties.
If the current profile is Public, please try to switch it to Private.

Can you also try to ping the IP address of your android tablet from your primary machine (and vice versa if you can do it easily)?
To check if both primary machine and secondary devices are reachable to each other.

Please also try to switch spacedesk server OFF-ON (to make sure that it’s running properly).

[Amfidiusz]

Thanks for a quick reply!

I checked every single tab in the modem settings, there was no setting suggesting it would be isolation-related.
I was able to ping the tablet.
I checked Public/Private network setting in Windows – and this change worked!! Now I am able to see the primary machine on tablet and the connection is stable.

Is it part of the connection tutorial? It surely should be.

Thanks a lot for your time and solid support! Keep doing a good job!

[spacedesk Lea]

Hi @amfidiusz,
Thanks for feedback.
We are glad that it’s working now on your side.
We will definitely add the network profile in the troubleshooting procedure in the user manual.

[作者]

帖子