[aliali]

Hello,
Hope you are well.
I am not sure I understand correctly what you want, but in case of attaching windows tablets to pcs or laptops (through LAN cable), you can try changing the spacedesk viewer setting (found on upper right before connecting both machines) to automatic connection and identifying the IPS address (or addresses) manually. This way, the secondary machine will automatically connect to the main unit each time they are connected together by the cable or through a specific IP address.

Hope this may be of any help
Best regards,
Ali

[aliali]

Hello,
Hope you are well.
The short answer of what worked for me, try uninstalling and reinstalling spacedesk. Then if using LAN cable for connection, try changing the last digit in the manual IP address of the main machine.

I have been suffering exactly the same problem randomly appearing when using space desk to link a windows tablet to a windows laptop (win 10 then again after updating to win 11) through a LAN cable. Spacedesk works great this way but this problem appearing repeatedly randomly made me feel it is unstable. I tried different solutions (deleting the stored Spacedesk data, changing spacedesk viewer settings, changing screen resolution and orientation and function from extend to mirror, disconnecting all additional monitors, recalibrating the pen on the touch screen, uninstalling other touch software such as super display and xp pen) and finally I uninstalled then reinstalled desk viewer on both machines multiple times and cleaned the registry and restarted. After several attempt, Spacedesk was able to work as normal again but the problem of wrong positioned (flipped) pen /touch cursor occurred out of blue from time to time and I kept retrying the previous routine and repeating it till it works again.
The latest time this problem occurred, I suspected it might be caused by using different LAN cable to attach the tablet to the laptop. I thought this might be similar to resolution problems appearing on windows when trying different VGA cables in connecting the very same monitor to the laptop/pc.
Before trying the different procedures of uninstalling spacedesk and other probable conflicting programs, I reused the previous cable and this alone did not work. But when I changed the ethernet IP address which I have previously inserted manually, this worked ! The cursor returned to its right position again.
Hope this may be of any help for you or any similar issues appearing.
Thanks again for spacedesk developers for this great software and I hope they will provide reasonable paid options for subscription later on.
Best regards
Ali

[作者]

文章