Unable to connect to the Windows PC (server) using the spacedesk HTML5 viewer

[mamesuke]

Server PC: Windows 11 Enterprise
⇒Spacedesk Driver：v2.1.23
Client PC: Mac OS Monterey ver 12.7.6

In the above environment, I want to use the spacedesk HTML5 VIEWER on the Client PC to view the screen of the Server PC.
However, starting last week, the connection suddenly stopped working, and I am unsure of the cause.
Could you provide some advice?
The network address specified in the HTML5 VIEWER was correct. When I try to connect,
the error message ‘Could not connect. Connection Timeout. Make sure your Server-IP is correct.’ appears.

附加檔案:

你必須 登入 才能查看附件檔案。

[spacedesk Renz]

Hi @mamesuke,

Can you try saving the HTML5 Viewer on your viewer machine then see if works on your end? For additional details, you may refer to the User Manual under the section Run on any Machine in HTML5 Web browser. Thank you!

• 該回覆由 spacedesk Renz 於 2 months, 2 weeks ago 修改。原因： Added email notification

[franco]

Good Morning,
same issue hier, MacOS Ventura 13.6.9 connect to Windows 10 Pro ( Spacedesk Version 2.1.23)
No access . If i run html 5 on Windows Desktop, same did not connect.
🙁
any advice ?
thx
Franco

[spacedesk Renz]

Hi @franco,

Can you try the solution I suggested to @mamesuke?

Thank you!

[franco]

Hi Mamesuke, as i wrote, did the HTMl5 on the Windows maschine where the Spacedesk is installed. Sorry to say no luck ……
thx
franco

[mamesuke]

Thank you.
I tried the method from the link, but the issue wasn’t resolved.
The error message has now changed to ‘Could not connect. Could not create WebSocket.’
The Client PC’s name still doesn’t appear on the Local Area Network.

附加檔案:

你必須 登入 才能查看附件檔案。

[spacedesk Renz]

Hi @mamesuke,

Which browser did you use? Can you try the solution I gave earlier with either Microsoft Edge or Google Chrome? Thank you.

[mamesuke]

Thank you.
Since the Client PC is a Mac, I used Google Chrome to try the solution you suggested earlier, but it didn’t resolve the issue.
The version of Google Chrome is up to date.

[franco]

@maesuke
just for information:
the IOS Client from the Ipad has in my case no Problem to connect to the Windows Spacedesk Server ( works fine) .From Android with Chrom on Tablet, HTML5 cant connet.

[spacedesk Renz]

Hi @mamesuke,

Sorry, can I ask you to try again in Google Chrome by doing the following: click on the three dot menu on the top right side of the browser, select “Cast, save, and share” then click on “Save page as…”

If you still encounter an error, please post it on your next reply. As to the first error you encountered, we are currently looking into it and will get back to you as soon as possible.

Thank you.

[mamesuke]

After trying the method you suggested, I was able to display the Server PC’s screen on the Client PC using the HTML5 Viewer.
Thank you! The issue is resolved.

[franco]

Servus, what was the Solution you had done ? still here with the same issue ?
thx
franco

[mamesuke]

@franco,
I followed the solution you provided by clicking on the three dot menu on the top right side of the browser, selecting ‘Cast, save, and share,’ and then clicking on ‘Save page as…’.
After that, I was able to connect using the HTML5 Viewer.
Since my default browser is Safari, I am currently connected via Safari.

[ggrinton]

I have the same issue. I can connect from iOS without any problems, but the Mac will not connect. Chrome gives the error “Could not connect. Connection Timeout” and Safari says “Could not connect. Could not create websocket.” I tried the “Cast/save/share” suggestion, but then trying to connect using the created link just gives a timeout on both browsers (without askng what IP address to connect to.). The Websockets test says everything is OK.
All suggestions would be welcome thanks.

• 該回覆由 ggrinton 於 2 months, 2 weeks ago 修改。

[ggrinton]

Follow-up: When I did the “Cast/save/share” from the green initial page, rather than the red page showing the error message, the connection using the saved link worked correctly. I still had to enter the correct IP address.

I hope this might help someone else.

[shuoi]

I am having the same issue.

When connecting through Amazon Silk, the browser for Echo Show 8, it used to work just fine but for about a week or so it doesn’t connect.
It doesn’t seem like there’s an option in Amazon Silk to save the file and run from it, so the provided workaround doesn’t apply to me.

No changes were made in my Windows server settings and the connection works for Android Viewer App, the issue seems to be the HTML viewer itself.

What else can I do?

[spacedesk Renz]

Hi @shuoi,

We are currently investigating the issue with the HTML5 viewer and will get back to you as soon as possible. Thank you.

[作者]

文章