Random automatic disconnects

[OurLove]

Hello, developers.
I have a problem now. When my PC extends the screen to the iPad, the iPad’s spacedesk disconnects automatically, and it disconnects a few minutes after extending the screen.
I put the diagnostic log in the attachment.

[OurLove]

Since the compressed package exceeds the attachment space limit, it can only be placed here:https://we.tl/t-3aCW9FSUkT

[spacedesk Lea]

Hi @ourlove,

Unfortunately, the zipped folder you sent does not contain spacedesk diagnostic logs.
Please follow the steps below:
– Open spacedesk Driver Console -> Diagnostics
– if Debug View is not available, please click the download button first
– switch Diagnostic Collection ON (make sure to click Yes in the User Account Control box to proceed)
– try to connect your viewer app and wait for the disconnect issue to happen
– switch Diagnostic Collection OFF
– click Save All Information button
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.

[OurLove]

Well, unfortunately, this happened again very quickly.
I will describe the situation in detail again. When the iPad is connected to the spacedesk, it may be disconnected after a few minutes. At this time, there will be no prompt message, because the spacedesk screen on the iPad will not change, but the spacedesk has been disconnected. When I want to move the mouse to On the iPad extension screen, I found that I couldn’t move it, and then I realized that the spacedesk was disconnected. This is very frequent.
Hopefully this time I can send the spacedesk diagnostic logs you need.
The diagnostic logs are in the attachment.

附加檔案:

你必須 登入 才能查看附件檔案。

[spacedesk Lea]

Hi @ourlove,
Thank you very much for sending the diagnostic logs.
We are currently analyzing it.
Could you please try the following and check if it will help:
– switch OFF the Videowall mode in spacedesk Driver Console
– set your current network profile to Private via Windows Settings -> Network & Internet -> Properties, underneath Network Profile type select “Private”

[OurLove]

Hello developers.
Unfortunately, I had a very noticeable lag when I turned off the Videowall mode, and setting the network to private didn’t work either. Even disconnects are more frequent after doing what you said.
However, I read in the manual that you can connect using the PC’s mobile hotspot, and I tried it with good results and no disconnects so far. So I think it should be that my network is unstable and the spacedesk is disconnected (because I am using the campus network).
My experience using spacedesk these days is very good (except for a slightly obvious delay, since I mainly use spacedesk to read documents, the impact is not particularly large, but it would be better if the delay problem can be solved), if there is a problem in use I will continue to give feedback and look forward to your continued updates!

[spacedesk Lea]

Hi @ourlove,
Thank you very much for the feedback.

Now I see that you are using a public wifi.
Connection over a wireless network through a router (especially public wifi) can cause a slow performance and unstable connection.

We are glad that you fixed the issue by connecting over a Mobile Hotspot network.
A direct network connection is recommended in order to achieve a good performance and prevent connection lost issue.

FYI: We are currently working on the performance improvement of the spacedesk e.g. USB cable support for Android and hardware accelerated image encoding which will be available soon.

[作者]

文章