-
搜尋結果
-
Hello,
Thank you for the wonderful app. Thanks to Spacedesk, I’ve had a great experience.
Suddenly, around 10 p.m. on February 18, 2024, Japan time, I found that while I can still connect via USB with my Android tablet, I’m unable to connect wirelessly.
I’ve confirmed that there are no issues with the firewall settings of my security software. Even after updating to the latest version and reinstalling the app for the secondary machine, the issue persists.
Could you please advise on the possible causes and solutions?
Best regards.We mirror a Windows 11 laptop wirelessly to 4 Android Fire TVs, via MonitorsAnywhere & the Spacedesk app on those TVs. The laptop mirrors a Google Slide presentation to those TVs in full screen Slideshow mode. The remote controls for those TVs are used to scroll through the slide presentations via the directional controls on the remotes. However, upon updating the Spacedesk driver today to v2.1.11, the remotes can no longer scroll through those slides. The slides can be advanced via the laptop, but the remotes no longer work in this manner. Just to be clear, this functionality was working today right up until initiating the v2.1.11 driver update…this was the only change made, & now this specific remote functionality is dead.
Is there a reason why this would’ve happened? I’ve tried repairing the driver install, but the remotes still do not work. They were working on the previous Spacedesk driver version (2.0.8.x I believe, installed about a month ago). I can’t find a way to rollback the current version to that prior working version, nor can I find where to download any prior driver versions directly from Spacedesk.
Any help you can offer would be greatly appreciated.
Win 11, Spacedesk 2.1.11, Samsung galaxy tab A with S pen, Android 8.1
Using power point 2007 (a bit old I know, but heavily customized and payed for)
The problem is when in the slide show on a projector, using the pen to write on the slides (on the tablet) the writing does not show on the projector, only on the presenter view, plus whenever I remove the pen away of the screen the slide turns to the next one.
I would like to be able to write and annotate on the projected slides and do the next/previous slide either by swiping or using the arrows on the presentation screen NOT by the pen touching the screen.
Appreciate your help.Hey spacedesk folks!
OK so I’ve got a… device. It’s a picture frame of sorts (nano-frames)… running android 7.1.2 (that I can’t upgrade).
The google play store doesn’t recognize the device at all, so I can’t install from there, and the html5 viewer in Brave browser gives an error about secure connections and SSL versions.
Is there an APK to install it that isn’t from shady APK sites?
I can get files onto the frame, and use a mouse and keyboard on the frame to poke around at internet sites and things and do slideshows of my files or online ones… but it’d make my whole process 10000x easier if I can get spacedesk on there and essentially use it as a second monitor from across the room.
Many thanks if there’s any solution! (I’m a dev so don’t be afraid to include like… usb debugging and various nonsense.)
Cheers,
T
主題: 2 USB device
Hi,
I use a tablet samsung S9+ and a phone samsung s21.
When S9+ is USB and s21 is Wifi.. all is ok but wifi is slow and sometimes very slow.
So I try to connect both via USB.
I see on the spacedesk Desktop panel both are now on USB (USB(2 connected))
and I removed Wifi from the s21 to make sure it’s only USB.
But the s21 displayes a black screen.
In display settings (windows10) I see the s21 screen greyed out.
in the spacedesk Desktop panel s21 says : “Display mode Detached”
where the s9+ says “Display mode Extension mode”
If I remove the s9+ USB then s21 goes in “extension mode” and I can use it.
Not sure what I need to do to get both in extension mode ?thx for help.
First of all, thank you to the developers. This is great software!
my set up is: windows 11 pc running MSFS 2020.
Plus 4 old iPads, that are instrumentation panels for msfsWhen the iPads connect via Wi-Fi, they work 100% and are seen by windows pc as 4 monitors.
Since I want to avoid Wi-Fi congestion and keep display rates high, I connect the iPads via usb and turn off Wi-Fi.
Connection via usb, works 50% of the time.sometimes it works if I reboot iPads and pc. Sometimes after 10 minutes the iPads ask me if I want to connect.
Do you have any suggestions on how I can make them connect via usb 100%?
Thanks
I have 2 USB 2.0 cables and 2 USB 3.0 cables. I found that when I use the USB 2.0 cable, my Android tablet can be normally recognized by Spacedesk on Windows. However, when I use the USB 3.0 cable, it shows that the number of devices is 0. I can confirm that my USB 3.0 cable is good because its other functions can be used normally. Also, I am sure that the settings of my Windows computer and Android tablet are correct, and the USB interface used is the same. The only difference is the USB cable. If I slowly insert the USB 3.0 TYPE-A, it can be recognized at this time, but the reason for this recognition is that slow insertion will be recognized as USB 2.0. So, does the current Spacedesk indeed not support connection using USB 3.0?
Hello, I have the following problem: When I connect an iPhone 8 via wire and connect to a computer, I have an excellent picture and there are no lags, but when I connect an ipad mini 2 instead of an iPhone 8, I start to experience lags, although the computer is set to 60 hz and there is no such problem on iPhone 8 I connected via USB 3.2 gen 1
Hi.
The KindleFire is currently connected via USB and is in a state where it can perform the ‘automatically start app when Windows PC is switched on, automatically connect’ operation.
When the PC is off, it is set to keep the home screen displayed and not perform screen sleep.
Therefore, we would like to know if the following can be achieved.1. from screen sleep (screen off), when the PC starts up, can it automatically recover, start up apps and automatically connect?
2.I own an iPad mini4, can I connect it via USB as well, and can I automatically connect it when the PC is switched on?Currently, when I try to use it on my iPad, I have to tap the connection confirmation dialogue, and the app itself quits when disconnected, so I have to start the app and tap the dialogue in order to display it again.
If there is a better way, please let me know.
Thanks.Hi,
I got the same problem, on 2 different Ipads I get the message “connected – display off”
– I deleted the app and reinstalled it
– I deleted the app from windows and deleted it
– I re-installed the nvidia GPU drivers
– I am running the latest versions, windows 11 app: 2.1.09 / the ios app 1.0.51also i tried to connect directly with USB cable, I installed Itunes, but through usb I dont see the device.
I also attached a logfile, i hope this can help a bit 🙂
I think I prefere to use both options since using the usb, it will probably be faster, and I want to use it in FS2020.I also have no incompatible software installed 🙂
Thanks for the help!!
Hi and Hello,
everythink works fine on WiFi and USB – great software – is there a way having SpeceDesk completly filled out my tablets display? nice regards and love
My device: Realme 9 5G
OS: Android 12
Screen: 6.6″ — 2412 x 1080 (480 DPI)Hello,
I’m encountering this issue where the screen tears only on the Mi Pad 5.
I have other devices working well, such as Mi Note 10 Lite, Samsung Galaxy Tab 2 and some more that I tested.
The resolution matches the native, 2560 x 1600, the refresh rate is locked to 60 on the Mi Pad 5 Spacedesk app, Android system and Windows 11 display settings.
I have tried uninstalling drivers, playing with VSync options, making sure the SpacedeskService is on real-time and high, adding the service to the Nvidia control panel and putting it on the GPU, setting the GPU in Windows to specific Nvidia, and all drivers are up to date, windows 11 also.
The only thing that I suspect is the colour bit depth in the advanced display setting in Windows is dead set on 8-bit even though everywhere else is 24-bit.
Also tried different refresh rates on the Android system, different USB ports on my laptop and different high-quality USB cables.
Another thing that bugs me is that in the adrenalin software for the integrated AMD GPU that I assume controls display output it says FreeSync is not supported, I have researched about activating it but I have a laptop and the only thing I found it for monitor settings using monitor specific menus.
I’m not sure what else I can try out, but I would appreciate any recommendations.