Forum Forums spacedesk Discussions I can’t install Spacedesk driver

Viewing 5 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #5870
    Mikhal980
    Participant

    I uninstalled Splashtop Wired XDisplay’s Agent but still I can’t install Spacedesk driver. It gives me those errors.

    Attachments:
    You must be logged in to view attached files.
    #5890
    spacedesk Marcel
    Keymaster

    Please open spacedesk Driver Console
    -> Go to “DIAGNOSTICS” (no need to switch anything ON or OFF).
    -> Click button “Save all information”.
    -> Use file explorer to compress (zip) folder.
    -> Attach and send the *.zip file.

    #5937
    spacedesk Lea
    Keymaster

    Hi @mikhal980,
    For further analysis, could you please send us the following:
    – run dxdiag.exe on your primary machine, click “Save all information” and send us the output file
    – spacedeskSetup.log file located in C:\Users\Public
    – setupapi.dev.log file located in C:\Windows\INF

    Please save all requested files in one folder, then right-click -> Send to -> Compressed (zipped) folder, then attach the *.zip file on your next reply.

    #6725
    Mikhal980
    Participant

    Hi, here are the files.

    Attachments:
    You must be logged in to view attached files.
    #6765
    spacedesk Lea
    Keymaster

    Hi @mikhal980,

    Thank you very much for sending the requested logs.
    Based on the logs, there’s a RPC_S_CALL_FAILED error (The remote procedure call failed) during spacedesk USB driver installation.

    One of the causes of this issue:
    – failed installation/uninstallation of software that may have left invalid entries in your system
    – improper system shutdown due to power failure

    Could you please try the following suggestions below:
    1. Run services.msc then find Remote Procedure Call (RPC), and check if it’s running.
    2. Make sure to install any pending Windows Update on your Windows Settings.
    3. Your AMD graphics driver is not digitally signed, please try to repair/reinstall your AMD graphics driver. Just download the AMD Auto-detect tool here: https://www.amd.com/en/support, to update your AMD graphics driver properly.
    4. Run Command Prompt as Administrator, then type the command: “sfc /scannow” and press Enter.

    • This reply was modified 2 years, 9 months ago by spacedesk Lea.
Viewing 5 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.