Forum › Foren › spacedesk Discussions › spacedesk x10 no driver error
- Dieses Thema hat 10 Antworten sowie 2 Teilnehmer und wurde zuletzt vor vor 1 Jahr, 10 Monaten von spacedesk Lea aktualisiert.
-
AutorBeiträge
-
Dezember 12, 2022 um 1:11 pm Uhr #11160jloughranTeilnehmer
We are running Mawi devives with spacedesk acting as the go between. We thought we were having pc issues as we kept disconnecting from spacedesk then we would be reconnecting to server or would have connected display off. We then replaced the NIC card and the cabling between devices. This didnt do anything. We then spoke with MAWI support and updated spacedesk both on the server and on the clients side (apk). Again this did not fix the issue. We then replaced the PC with one we had in storage but the issue is still the same.
IS there something we can do to help narrow down what is causing these issues and it seems when we get the spacedesk x10 no driver error the issues begin and we loop for a while.I have logs but cant make much out of them.
Dezember 13, 2022 um 1:39 am Uhr #11165spacedesk LeaAdministratorHi @jloughran,
For further analysis, could you please send us the diagnostic logs of the issue:
Just follow the steps below:– open spacedesk Driver Console -> Diagnostics
– if Debug View is not available, please click the download button first
– switch Diagnostic Collection ON (make sure to click Yes in the User Account Control box to proceed)
– connect your viewer app and reproduce the issue
– switch Diagnostic Collection OFF
– click Save All Information button
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.- Diese Antwort wurde geändert vor 1 Jahr, 11 Monaten von spacedesk Lea.
Januar 9, 2023 um 10:48 am Uhr #11479jloughranTeilnehmerHello
Sorry for my late reply
I am still having these issues and have attached the log file but as a .txt so it will let me upload
Can you see anything
I get no driver or network lost but I still have network when it says this
Any help would be appreciated
Januar 9, 2023 um 10:57 am Uhr #11480jloughranTeilnehmerI have a file here it is only for 4 minutes long in real time but has 155432 lines and is 12MB.
Whats the best way to upload?Januar 9, 2023 um 11:10 am Uhr #11481jloughranTeilnehmerI will attach 2 zips only way I can think to do it. Part 1 and Part 2
Attachments:
You must be logged in to view attached files.Januar 9, 2023 um 11:10 am Uhr #11483Januar 10, 2023 um 3:59 am Uhr #11489spacedesk LeaAdministratorHi @jloughran,
Thanks for sending the logs, but unfortunately it doesn’t show any spacedesk logs.
Please follow the steps above on how to get the diagnostic logs via spacedesk Driver Console.
spacedesk Driver Console app generates a diagnostic folder name like “2023-01-10-XXXXX-spacedeskRuntimeDiagnostics” (which contains all necessary diagnostic log files), then this is the folder that you should compress (zipped).Januar 11, 2023 um 12:28 pm Uhr #11528jloughranTeilnehmerApologies for that.
Attached the proper ones now. The error occurred around 12:23 so you may have to skip down a bit as I started at 11:55Any help is appreciated as this is driving me nuts.
Thanks JoeJanuar 11, 2023 um 12:29 pm Uhr #11529jloughranTeilnehmerFile was too large again so removed the setup file will attach that as well
Attachments:
You must be logged in to view attached files.Januar 11, 2023 um 12:30 pm Uhr #11531Januar 12, 2023 um 2:02 am Uhr #11541spacedesk LeaAdministratorHi @jloughran,
Thanks for sending the diagostic logs.
We are currently checking the debugview traces.
Meanwhile, there are still some log files missing that we also want to analyze e.g. spacedeskDiag.txt, and some *.etl log files.
Can you please check if these files were not being collected after spacedesk Diagnostic collection?
Please take note that saving all the collected logs takes some time to finish maybe you have to wait a bit longer, there will be a dialog box that will show up once it finish saving all the logs.- Diese Antwort wurde geändert vor 1 Jahr, 10 Monaten von spacedesk Lea.
-
AutorBeiträge
- Du musst angemeldet sein, um auf dieses Thema antworten zu können.